3D Printer Stepper Motors & Drivers
Stepper motors and drivers are essential for precise control over 3D printer axes, leading to high-quality prints. We offer a wide range of printer stepper motors and drivers suitable for different printers, including high-torque motors for extruders and compact drivers for Z-axes.
Our selection includes top-quality Nema Stepper motor and branded driver boards with various specifications like step angle, holding torque, and voltage, ensuring a perfect fit for any printer setup. Upgrade your printer’s performance with our range of 3D printer stepper motors and drivers. With our high-quality products, take your 3D printing to the next level!
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
SOLD OUT
DMA860H 2-Phase 24-80 VDC Max. 7.2A Stepper Motor Driver
Deek-Robot
KES7,000.00Description0.Power InPut : AC18-80V or DC24-80V1.New 32-bit DSP technology 2.Ultra-low vibration noise3.Is built with high segmentation4.Automatic setting of parameters5.Precision current control of makes the motor much less hot6.Electrical current...- SKU:
- PESMD27
KES7,000.00 -
42BYGH34 42MM 1.3A 0.3N.M Low noise Motor
E3D
KES2,000.00Specification: 1. Drive mode: constant current chopper drive:2. Excitation mode: 1-2 phase excitation (two-phase eight-beat operation). It can rotate forward and backward;3. Steering: energize in the order of A -B -C -D -A, see C.W from the shaft...- SKU:
- PEELB89
KES2,000.00 -
SOLD OUT
DRV8833 Dual H-Bridge Motor Drive Module DC 3-10V
Electro
KES250.00Description: 1. Size:18.5*16mm 2. Input voltage:3V-10V 3. Single H-Bridge output current:1.5A(It can drive two DC motor) 4. Overcurrent protection:YES 5. Short circuit protection:YES 6. Undervoltage lockout:YES 7...- SKU:
- PEDFR47
KES250.00 -
SOLD OUT
DM556 2-Phase 18-48 VDC Max. 5.6A Stepper Motor Driver
Deek-Robot
KES2,600.00Features: 1. Supply voltage can reach 48V 2. The peak value of the output current can reach 5.6Az 3. Optical isolation, the pulse maximum response frequency is 200KHz 4. Low speed zero vibration with minimal noise 5. Strong anti-interference...- SKU:
- PESMD25
KES2,600.00 -
SOLD OUT
DM542 2-Phase 18-48VDC 4.2A Stepper Motor Driver
Deek-Robot
KES2,500.00Features: ● 57 series 4.5A or less (including 4.5A) two-phase four-wire, six-wire, eight-wire stepper motor also can be used● The drive uses a discrete component structure that supports two-phase 4-wire, 6-wire, and 8-wire as long as there is...- SKU:
- PESMD28
KES2,500.00 -
High Power Heat Bed Mini MOS Module
Deek-Robot
KES800.00Product manual: 3d printer hot bed high-power expansion module, the appearance of small atmosphere, compact design, heat more powerful, to solve the hot bed power is too large, the current load problem, the module under normal heat dissipation, measured...- SKU:
- PEASR82
KES800.00 -
SOLD OUT
42BYGHW811 NEMA 17 Stepper Motor
RobotLinking
KES2,500.00SpecificationsStep accuracy: ±5%Ambient temperature range: 20°C ~ 50°CInsulation resistance: 100MΩ Min.50V DCDielectric strength: 500V AC for 1 minuteStep angle: 1.8°Voltage rating: 3.1 VCurrent rating: 2.5 AResistance: 1.25...- SKU:
- PEDFR98
KES2,500.00 -
17HS4023 12V NEMA 17 stepper motor
RobotLinking
KES1,500.00Specifications:Model no.: 17HS4023Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 ± 10%Ω/Phase Inductance: 3.2 ± 20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B Step Angle:...- SKU:
- PEDFR92
KES1,500.00 -
3D printer hot bed Power expansion board
DFRobot
KES500.00Feature:Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.25A...- SKU:
- PEASR45
KES500.00 -
57BYGH76 Nema23 stepper motor
RobotLinking
KES4,250.00A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire uni-polar/bipolar stepper motor has 1.8° per step for smooth motion and a nice holding torque. This motor specified to have a max current of 2...- SKU:
- PEYTA42
KES4,250.00 -
5 Axis CNC Stepper Motor Driver MACH3
RobotLinking
KES1,200.00Specification: Material: Plastic Color: Blue Size:92 x 61mm Features: This is a full-featured MACH3 interface board, with the following features: 1. Fully support MACH3 and other computer software to support parallel control...- SKU:
- PETSC21
KES1,200.00 -
SOLD OUT
Nema23 23HS5628 Stepper Motor
E3D
KES3,300.00Description:23HS5628 56mm Nema 23 Stepper Motor 57 Motor 2.8A 126N.cm 4-lead CNC Laser Grind Foam Plasma Cut Engraving MachineCertification: CE, ROSH, ISO, FCCShaft Diamter: 6.35mm or 8mm "D"...- SKU:
- PEDFR25
KES3,300.00 -
TB6600 Single Axis Two Phase Hybrid Driver
Autonics
KES1,300.00TB6600 stepper motor Driver Controller 4.5A 8 ~ 50V working, TTL 16 Micro-Step supported CNC Single Axis is a stepper motor driver based on the TB6600HG chip. This driver controller is suitable not only for amateur CNC systems, but also for...- SKU:
- PEMIO88
KES1,300.00 -
SOLD OUT
Drv8825 Stepper Motor Driver High Current
Electro
KES400.00Brief introduction The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier is almost the same, so it can be used...- SKU:
- PEDFR45
KES400.00 -
SOLD OUT
Nema17 17HS4401 Stepper Motor
E3D
KES1,500.00This is the most popular Nema 17 model. It with 1.8°step angle (200 steps/revolution). Each phase draws current 1.3A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). Normally , it use for Linear actuators and CNC...- SKU:
- PECEM72
KES1,500.00 -
SOLD OUT
A4988 Stepper Motor Driver(with Heatsink)
Electro
KES200.00A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988...- SKU:
- PERSS12
KES200.00 -
CNC Shield V3 GRBL Compatible
Cytron
KES500.00Introduction This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO...- SKU:
- PECNC78
KES500.00 -
SOLD OUT
TB6600 9-42VDC Stepper Motor Driver
Deek-Robot
KES1,400.00Descriptions: 1. This is a updated version TB6600 4A two-phase stepper motor driver. Positive and negative control can be achieved. 2. Select the 7-step subdivision control (1, 2/A, 2/B, 4, 8, 16, 32) through the 3-digit DIP switch. 4...- SKU:
- PESMD57
KES1,400.00 -
SOLD OUT
DRV8825 A4988 Motor Driver Control Panel Board
diymore
KES400.00Feature: 1. You can use A4988/DRV8825, take care of the direction when inserting, or it may burn down the driver.2. The jumper hits the position of ON DP to indicate 16 subdivision (4988) or 32 subdivision (8825).3. Jm connection motor.4. Jv connects...- SKU:
- PEDRV48
KES400.00 -
SOLD OUT
HY-DIV268N 0.2-5A CNC stepper motor driver
Deek-Robot
KES2,000.00Description HY-DIV268N-5A subdivision-type two-phase hybrid stepping motor drive use DC 12 ~ 48V power supply.It is suitable for driving two-phase hybrid stepping motor, whose dynamic voltage is 12 to 48V,the current is less than 5A and the outer...- SKU:
- PEGBM91
KES2,000.00