Sensors

2.2" Bending sensor. The degree of bending of the sensor can be converted into a change in resistance value. The larger the bending, the higher the resistance. This sensor can be used to make energy gloves.Note: Bending direction: The side with...

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver,...

8232 AD8232 Ecg physiological measurement Ecg Physiological Measurement Heart Pulse Ecg Monitor Sensor Module  Product Parameters:  Supply voltage: DC 3.3V Output Type: Analog Output Output Interface: 2.54 pin or headphone jack Product...

This is an Arduino-compatible TDS sensor / meter kit for measuring water TDS value, to reflect water cleanliness. It can be applied to water for domestic, hydroponic and other water quality testing fields. You can also check the Sensor...

Features Supports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3+ Supports night vision when works with infrared LEDs 8 Megapixels Sensor: Sony IMX219 Resolution: 3280 × 2464 Lens specifications: CMOS size: 1/4inch Aperture (F): 2...

Description: MH-Z14A CO2 gas sensor is a general intelligent small sensor, using the non-dispersive infrared (NDIR) principle to detect carbon dioxide in air, and has a good selectivity and no oxygen dependence, long service life.It has built-in...

Description:User-friendly: you can control the module with embedded MCU, MCU with serial port, MSP430, 51, AVR, PIC, STM32, ARM and FPGA, Arduino, pcDuino controllers etc. This module is controlled by serial port control, you can also use serial port of...

Specification: Antenna: Whip Transmission power: 2mW (+ 3dBm) Outdoor transmission distance: 120 meters wireless speed: 250kbps Product Introduction XBee and XBee-PRO ZB embedded RF modules provide cost-effective wireless ZigBee mesh network...

Descriptions: Soil temperature and humidity probe using the temperature and humidity sensors as the core component, can be directly connected to the single-chip microcomputer to use .With very high consistency, can be completely interchangeable. the...

Description As the third generation product of TF series, TF03 inherits the cost-effective and compact-integration advantages from the previous two generations. Meanwhile, TF03 upgrades more than ten key parameters and offers multiple expansion...

Product upgrade part: 1. The pin GPIO34 is replaced with GPIO15 2.  Replace the charging IC (TP5400) with the power management AXP192 3. Replace TX and RX pins of GPS 4. The power switch is removed and replaced with a key switch 5. Minimize...

Introduction:  MH-ET LIVE Scanner v3.0 is a barcode and QR code scanning recognition module. It adopts a professional image processing chip for barcode recognition. It can quickly and accurately read under the high performance of fast and stable...