Cytron

Description: This is a collection of emission and reception in one photoelectric sensor. Detection distance can be adjusted according to requirements. The sensor has a detection range,...

Features:Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the...

Description: 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A car micro mini blade fuses, which is made of premium quality zinc alloy with a plastic cover shell, durable in use. With one clip for convenient to...

1.The single cylinder pH electrode allows you to connect BNC socket directly into the input terminal of pH meter or pH controller or any pH device that has a BNC input terminal. The cable is long...

RED 100-120 1.8-2.0V 20MA   BLUE 120-150 3.0-3.2V 20MA   GREEN 400-500 3.0-3.2V 20MA   YELLOW 120-150 1.8-2.0V 20MA   WHITE 500-600 3.0-3.2V...

Product Description LED bulb Power: 10W Luminance: 900-1000LM Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use) Integrated approach: Series...

Description    1. The rated range: 50 ma 12 VDC    2. Contact resistance: 50 m Ω Max (initial)    3. The insulation resistance: 100 m Ω...

Product Description 1, Support EM4001, EM4100, EM4200, TK4100 and its compatible RFID ID card2, Frequency: 125KHz3, First 10 digits of the RFID proximity card read. 4, Windows...

Product Description 1, Support EM4001, EM4100, EM4200, TK4100 and its compatible RFID ID card2, Frequency: 13.56MHz3, First 10 digits of the RFID proximity card read. 4, Windows...

Description: Module Properties: non-isolated step-up module (BOOST)Size: 65 * 56.5 * 23 (length * width * high) (mm)Input voltage :10-32VOutput voltage: 12-35V (adjustable)Output Current: 6A...

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 for Arduino Raspberry Pi DIY Servo Shield Module Want to make a hexapod walker? Maybe you're making a piece of art with tons of moving...

Features: Material: Electronic components + PCB Size: About 31 * 19 * 29mm / 1.22" * 0.75" * 1.14" Main color: Black Working voltage: 5V Pulse circle: 20 By rotating the rotary encoder can be...

Product Features: Comes with 3.3V voltage, with power indicator Power input with anti-reverse protection, and can not provide more than 150mA of current. To achieve direct serial 5V and 3.3V...

Feature:High-quality sound,with smooth surface.With wide frequency response and low distortion.The performance to soft music and light music is excellent.It is the basis of the electric...

 Features:   Used for SD USB speaker, bluetooth speaker, and etc.   It is small, delicate and strictly functional.   Totally brand new and high quality...

Features: LC 5A Over-current protection Sensor module uses current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current,...

Feature: The OV2640 image sensor features 2 megapixels (1632x1232 pixels) Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor. Through...

Description:Support chip size: 1.27mm pitch, full range of SOP8 wide body and SOP narrow body DIP-8 line.200MIL pack SOP8 chip and narrow body 150MIL pack SOP8 chip, a multi-purpose and more...

Introduction: (1) The module uses 9012 transistor drive (2) Operating voltage 3.3V-5V (3) Fixing bolt holes for easy installation (4) PCB size: 2.0cm * 1.5cm Interface definition: (1) VCC...

GY-291 ADXL345 3-Axis Accelerometer is a sensor board based on ADXL345 accelerometer integrated circuit. The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution...