Electro
DRV8833 Dual H-Bridge Motor Drive Module DC 3-10V
(No reviews yet)
Write a Review
- SKU:
- PEDFR47
- Shipping:
- Calculated at Checkout
Description
Description:
1. Size:18.5*16mm
2. Input voltage:3V-10V
3. Single H-Bridge output current:1.5A(It can drive two DC motor)
4. Overcurrent protection:YES
5. Short circuit protection:YES
6. Undervoltage lockout:YES
7. Overheating protection:YES
8. With a low-power sleep mode
1. Size:18.5*16mm
2. Input voltage:3V-10V
3. Single H-Bridge output current:1.5A(It can drive two DC motor)
4. Overcurrent protection:YES
5. Short circuit protection:YES
6. Undervoltage lockout:YES
7. Overheating protection:YES
8. With a low-power sleep mode
Feature:
1. ULT PIN:mode set.Low level is sleep mode
2. OUT1,OUT2:1-channel H-bridge controlled by IN1/IN2
3. OUT3,OUT4:2-channel H-bridge controlled by IN3/IN4
4. EEP PIN:Output protection.Default no need to connect, but you need to solder the two pads of J1 or J2 near the EEP pin together (Just as shown in the third image below).
5. VCC:3-10V
6. GND
1. ULT PIN:mode set.Low level is sleep mode
2. OUT1,OUT2:1-channel H-bridge controlled by IN1/IN2
3. OUT3,OUT4:2-channel H-bridge controlled by IN3/IN4
4. EEP PIN:Output protection.Default no need to connect, but you need to solder the two pads of J1 or J2 near the EEP pin together (Just as shown in the third image below).
5. VCC:3-10V
6. GND
Application:
1. DC motor which drive current is less then 1.5A
2. 4-wire step motor
1. DC motor which drive current is less then 1.5A
2. 4-wire step motor
Related Products
Related Products
L298 Dual H-Bridge Motor Driver
Deek-Robot
KES500.00
Product description:
The L298N driver module, using ST L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3...
L298N Dual H-Bridge Motor Driver Board
Deek-Robot
KES500.00
Product description:
Double H driver module uses L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, high...
SOLD OUT
L298N Dual Bridge DC stepper Motor Driver Board
Dikavs
KES550.00
Driver: L298N Dual H Bridge DC Motor Driver IC
Driven the terminal supply area Vs: +5V ~ + 35V; Such as need to take power inside the board, supply area Vs: + 7V ~ + 35V
Driven part of the...
Vibration motor module DC
Dikavs
KES200.00
Product description：
This is a small vibration motor suitable for use as a non-audible indicator. When the input is high, the motor will vibrate, just like your silent mobile phone...
AC to DC 1N4007 full bridge rectifier module
diymore
KES120.00
AC to DC power conversion module
This baby is a streamlined rectifier module, a rectifier filter is widely used in small transformer output, mainly used in electric power requirements is not high...
SOLD OUT
L9110S H-bridge Stepper Motor Driver
Autonics
KES200.00
Description:
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Infrared sensor with control circuit board
The sensitivity and holding time can be a