Instrumentation Trainers
Intrumentation Trainers are also an important part to technical studies to attain this we have developed various training units like | IOT Development Board | Linear Variable Differential Transducer (LVDT) Trainer | Load Cell Demonstrator | Strain Gauge Trainer | Ultrasonic Digital Distance Meter | Temperature Measurement Tutor using AD-590 | DC Motor Speed Control Trainer | Control System Trainer | PID Controller Trainer | DC Position Control System | Temperature Control System | DC Position Servo Trainer Analog & Digital | Motion, Sound & Force Trainer | Signal Conditioning Trainer | Arduino | Raspberry Application Board | Sensor Trainer Board | Temperature | Humidity | Smoke Detector | Alcohol Level Detector | IR Sensor | Tilt Detector | and many more.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Fuzzy Logic Trainer - Order Code 52396
TESCA
UGX0.00Order Code: 52396Name: Fuzzy Logic Trainer SPECIFICATION Salient Features Labview* based Fuzzy Logic Controller. Facility to monitor behavior of the controller output (Un) & process variable (MV) either on PC screen or on CRO...- SKU:
- 52396
UGX0.00 -
IOT Development Board - Order Code 52072D
TESCA
UGX0.00Order Code: 52072DName: IOT Development Board SPECIFICATION General Description 52072D Experimental Set Up has been designed specifically for begineers to learn IOT and apply it in embedded applications. The board contains...- SKU:
- 52072D
UGX0.00 -
Arduino Application Board - Order Code 52072C
TESCA
UGX0.00Order Code: 52072CName: Arduino Application Board SPECIFICATION ARDUINO UNO/MEGA BOARD Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pin14 (of which 6...- SKU:
- 52072C
UGX0.00 -
Raspberry Application Board - Order Code 52072B
TESCA
UGX0.00Order Code: 52072BName: Raspberry Application Board SPECIFICATION RASPBERRY PI 3 MODEL B Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 1GB LPDDR2 SDRAM 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac...- SKU:
- 52072B
UGX0.00 -
Light & Temperature Trainer - Order Code 52066
TESCA
UGX0.00Order Code: 52066Name: Light & Temperature Trainer SPECIFICATION TEMPERATURE SENSORS: LM335 Platinum RTD Resistance N.T.C. Thermistor Thermocouple HAVING STUDIED THIS MODULE(Temperature Sensors) : Describe the...- SKU:
- 52066
UGX0.00 -
PID Controlled Oven - Order Code 52063
TESCA
UGX0.00Order Code: 52063Name: PID Controlled Oven SPECIFICATION Small ovens are frequently used in class room experiments for the determination of temperature coefficients of resistances, capacitances, zener diodes, and also for studying the...- SKU:
- 52063
UGX0.00 -
CAP-501B Stepper Motor Linear Control Trainer
CHOIEO
UGX0.00Description • This unit is a stepping motor based linear motion control system, which covers basic application for programmable logic controller, stepping motor control technology and sensor technology. Thanks to the modular design, it...- SKU:
- CAP-501B
UGX0.00 -
Programmable Logic Controller Demonstrator (PLC - (Allen Bradley) - Order Code 52061
TESCA
UGX0.00Order Code: 52061Name: Programmable Logic Controller Demonstrator (PLC - (Allen Bradley) SPECIFICATION FEATURES: 52061 is a versatile & most comprehensive demonstrator setup to perform unique and hand-on training...- SKU:
- 52061
UGX0.00 -
Motor Control Trainer - Order Code 52060
TESCA
UGX0.00Order Code: 52060Name: Motor Control Trainer SPECIFICATION Order Code- 52060 is one of the most comprehensive motor control trainers. This system is designed for learning the working Principal of different types...- SKU:
- 52060
UGX0.00 -
Signal Conditioning Trainer - Order Code 52059
TESCA
UGX0.00Order Code: 52059Name: Signal Conditioning Trainer SPECIFICATION The SIGNAL CONDITIONING CIRCUITS trainer introduces students to display devices through a wide range of hands-on practical activities. This self...- SKU:
- 52059
UGX0.00 -
Rotational & Air Sensor Trainer - Order Code 52058
TESCA
UGX0.00Order Code: 52058Name: Rotational & Air Sensor Trainer SPECIFICATION The Positional Sensor study modules introduce students to input and output transducer, signal conditioning circuits and display devices through a...- SKU:
- 52058
UGX0.00 -
CAP-511A DC Motor Control Trainer
CHOIEO
UGX0.00Description • This trainer offers training for university students covering modern DC motor control principles with hands-on experience on different motor control techniques. • The frame adopts standard aluminum profile with...- SKU:
- CAP-511A
UGX0.00 -
DC Position Servo Trainer (Analog & Digital) - Order Code 52054
TESCA
UGX0.00Order Code: 52054Name: DC Position Servo Trainer (Analog & Digital) SPECIFICATION Order Code 52054 DC Position Servo Trainer (Analog & Digital) is designed specifically for the study of DC Servo Trainer and its use...- SKU:
- 52054
UGX0.00 -
PC Based Analog & Digital Motor Control Trainer - Order Code 52053
TESCA
UGX0.00Order Code: 52053Name: PC Based Analog & Digital Motor Control Trainer SPECIFICATION Introduction:Control systems are at the very heart of the technology-based world in which we live. As we grow increasingly reliant on the...- SKU:
- 52053
UGX0.00 -
Transducer & Instrumentation Trainer - Exhaustive Practical Course - Order Code 52051
TESCA
UGX0.00Order Code: 52051Name: Transducer & Instrumentation Trainer - Exhaustive Practical Course SPECIFICATION Rugged, self- contained panel trainer with a steel case and integral power supplies. It provides a range of transducer...- SKU:
- 52051
UGX0.00 -
Stroboscope - Order Code 52047
TESCA
UGX0.00Order Code: 52047Name: Stroboscope SPECIFICATION Introduction Measurement of the speed of a rotating shaft is a common requirement in many industrial and laboratory applications. Such measurements have usually been carried...- SKU:
- 52047
UGX0.00 -
Microprocessor Device Controller - Order Code 52045
TESCA
UGX0.00Order Code: 52045Name: Microprocessor Device Controller SPECIFICATION IntroductionThis unit has been designed to train the students to handle basic input - output operations of the 8085 microprocessor through 8255 ports...- SKU:
- 52045
UGX0.00 -
Light Intensity Control System - Order Code 52044
TESCA
UGX0.00Order Code: 52044Name: Light Intensity Control System SPECIFICATION Introduction Feedback is applied in a variety of systems to control different physical variables. In contrast with systems without feedback (open loop systems),...- SKU:
- 52044
UGX0.00 -
Potentiometric Error Detector - Order Code 52043
TESCA
UGX0.00Order Code: 52043Name: Potentiometric Error Detector SPECIFICATION IntroductionAll feedback control systems operate from the error signal which is generated by a comparison of the reference and the output. Error detectors perform the...- SKU:
- 52043
UGX0.00 -
Study of Second Order Networks - Order Code 52041
TESCA
UGX0.00Order Code: 52041Name: Study of Second Order Networks SPECIFICATION Second order networks are important because of the fact that these are the simplest networks that produce the complete range of transient response – from...- SKU:
- 52041
UGX0.00 -
Compensation Design Trainer - Order Code 52040
TESCA
UGX0.00Order Code: 52040Name: Compensation Design Trainer SPECIFICATION IntroductionPractical feedback control systems are often required to satisfy design specifications in the transient as well as steady state regions. This is usually...- SKU:
- 52040
UGX0.00 -
Relay Control System - Order Code 52039
TESCA
UGX0.00Order Code: 52039Name: Relay Control System SPECIFICATION Introduction Most physical systems are nonlinear to some extent, however, for purpose of analysis and design these are taken as nearly linear. In a few systems nonlinear...- SKU:
- 52039
UGX0.00 -
Study of Stepper Motor - Order Code 52038
TESCA
UGX0.00Order Code: 52038Name: Study of Stepper Motor SPECIFICATION Introduction With the rapid advancement in digital electronics, the stepper motor by virtue of its being a direct digital actuator, has become an important element of a...- SKU:
- 52038
UGX0.00 -
Study of Synchro Devices - Order Code 52035
TESCA
UGX0.00Order Code: 52035Name: Study of Synchro Devices SPECIFICATION Experiments Basic characteristics study - stator voltages as a function of the rotor angle using the built-in ac voltmeter. This shows the space variation of the...- SKU:
- 52035
UGX0.00 -
PID Controller Trainer - Order Code 52034
TESCA
UGX0.00Order Code: 52034Name: PID Controller Trainer SPECIFICATION Introduction Proportional-Integral-Derivative (PID) control has been especially popular in industrial processes like chemical, petroleum, power, food and manufacturing...- SKU:
- 52034
UGX0.00 -
Temperature Sensor Trainer - Order Code 52033A
TESCA
UGX0.00Order Code: 52033AName: Temperature Sensor Trainer SPECIFICATION Measurement of temperature is an important task in a large number of physical processes. A transducer in a device which converts the temperature information...- SKU:
- 52033A
UGX0.00 -
AC Position Control System - Order Code 52031
TESCA
UGX0.00Order Code: 52031Name: AC Position Control System SPECIFICATION Introduction2-phase ac servomotors have been traditionally used for position/ speed control applications especially in light weight, precision instrumentation...- SKU:
- 52031
UGX0.00 -
DC Position Control System - Order Code 52030
TESCA
UGX0.00Order Code: 52030Name: DC Position Control System SPECIFICATION Compact system - no mechanical hassles Simplified operation mP based storage of response mPositive/ Negative tachogenerator feedback IntroductionOne of the most...- SKU:
- 52030
UGX0.00 -
DC Motor Study - Order Code 52029
TESCA
UGX0.00Order Code: 52029Name: DC Motor Study SPECIFICATION Introduction A d.c. motor is commonly used as an actuator in many industrial control applications because of its features - large torque and ease of speed variation. The dynamic...- SKU:
- 52029
UGX0.00 -
AC Servomotor Study - Order Code 52028
TESCA
UGX0.00Order Code: 52028Name: AC Servomotor Study SPECIFICATION Two phase a.c. servomotor is one of the very important electromechanical actuators having applications in the area of control systems. The study of its operating principle...- SKU:
- 52028
UGX0.00 -
Digital Control System - Order Code 52027
TESCA
UGX0.00Order Code: 52027Name: Digital Control System SPECIFICATION Digital Controller implementation on mP - kit Simple Op-amp based analog plant CRO display of response Design and test new algorithms IntroductionDigital control of...- SKU:
- 52027
UGX0.00 -
PID Controller Trainer - Order Code 52026
TESCA
UGX0.00Order Code: 52026Name: PID Controller Trainer SPECIFICATION Conveyor Control by PLC enables students and practicing engineers to gain invaluable practical experience to understand the use of Conveyors and its control using...- SKU:
- 52026
UGX0.00 -
Pressure Transducer Trainer - Order Code 52013
TESCA
UGX0.00Order Code: 52013Name: Pressure Transducer Trainer SPECIFICATION Pressure Transducer Trainer is designed to learn concept of Pressure measurement. It helps students & industry professionals to understand operation of...- SKU:
- 52013
UGX0.00 -
CAP-511D AC Motor Control Trainer
CHOIEO
UGX0.00Description • This trainer offers training for university students covering modern AC motor control principles with hands-on experience on different motor control techniques. • The frame adopts standard aluminum profile with modular experiment...- SKU:
- CAP-511D
UGX0.00 -
Temperature Measurement Tutor using AD-590 - Order Code 52006
TESCA
UGX0.00Order Code: 52006Name: Temperature Measurement Tutor using AD-590 SPECIFICATION Has been designed specifically to study the Temperature Measurement Tutor using AD - 590. The board is self contained and require no...- SKU:
- 52006
UGX0.00 -
Ultrasonic Digital Distance Meter - Order Code 52005
TESCA
UGX0.00Order Code: 52005Name: Ultrasonic Digital Distance Meter SPECIFICATION Ultrasonic Digital Distance Meter has been designed specifically for measuring distance between 0.3 metre to 3 metres. The measuring distance is shown on...- SKU:
- 52005
UGX0.00 -
Optical Transducers Trainer (Photoconductive Cell, Photovoltaic Cell, Phototransistor & Pin Photodiode) - Order Code 52004
TESCA
UGX0.00Order Code: 52004Name: Optical Transducers Trainer (Photoconductive Cell, Photovoltaic Cell, Phototransistor & Pin Photodiode) SPECIFICATION Optical and Temperature transducers play a very important role in today's industrial and...- SKU:
- 52004
UGX0.00 -
Load cell demonstrator (C.R.) - Order Code 52003
TESCA
UGX0.00Order Code: 52003Name: Load cell demonstrator (C.R.) SPECIFICATION Looking to the recent requirement of educational institutions, we have developed. Load Cell Demonstrator. It shows digital dispalay of measured weight...- SKU:
- 52003
UGX0.00 -
Measurement and Control of temperature using RTD transducer (C.R.) - Order Code 52002
TESCA
UGX0.00Order Code: 52002Name: Measurement and Control of temperature using RTD transducer (C.R.) SPECIFICATION Industrial Control Transducer has been designed specifically for measurement and control of temperature using RTD Transducer. The...- SKU:
- 52002
UGX0.00 -
Linear Variable Differential Transducer (LVDT) Trainer - Order Code 52001
TESCA
UGX0.00Order Code: 52001Name: Linear Variable Differential Transducer (LVDT) Trainer SPECIFICATION Instrumentation trainer has been designed specifically for to study Linear Variable Differential Transducer (L.V.D.T.). The board is...- SKU:
- 52001
UGX0.00