Description
The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. The Raspberry Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for code and data storage. In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK. Just click https://pico.raspberrypi.org/getting-started/ to get started with Raspberry Pi Pico. Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow soldered SMT module.
| CATEGORY | SPECIFICATIONS |
|---|---|
| Microcontroller | RP2040 chip designed by Raspberry Pi |
| Cpu | Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz |
| Memory | 264 KB SRAM, 2 MB onboard Flash memory |
| Module | Castellated module (solderable directly to carrier boards) |
| Usb | USB 1.1 with device and host support; drag-and-drop programming via mass storage |
| Power & modes | Low-power sleep and dormant modes |
| Gpio & interfaces | 26 × multi-function GPIO pins; 2 × SPI, 2 × I2C, 2 × UART; 3 × 12-bit ADC; 16 × controllable PWM channels |
| Timers & clock | Accurate on-chip clock and timer |
| Sensors | Onboard temperature sensor |
| Libraries & features | Accelerated floating-point libraries on-chip |
| Programmable i/o | 8 × PIO state machines for custom peripheral support |
Features:
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Package Includes:
1x Raspberry Pi PICO development Board
Related Products
Related Products
Raspberry Pi Pico H board
Raspberry
Raspberry Pi Pico 2
Raspberry
Raspberry Pi Pico WH
Raspberry
Raspberry Pi Pico 2W
Raspberry
Raspberry Pi Pico W
Raspberry