null
Arducam

Raspberry Pi Camera Module 3 NoIR SONY IMX708 Sensor 12MP

(No reviews yet) Write a Review
SKU:
PEQSP58
Shipping:
Calculated at Checkout
  • Raspberry Pi Camera Module 3 NoIR SONY IMX708 Sensor 12MP
  • Raspberry Pi Camera Module 3 NoIR SONY IMX708 Sensor 12MP
  • Raspberry Pi Camera Module 3 NoIR SONY IMX708 Sensor 12MP
TZS184,186.40

Sold Out

Frequently bought together:

Description

The Raspberry Pi Camera Module 3 is the latest entry in the mainstream RPi camera line-up, and the successor to the popular Camera Module 2. Built around a 12-megapixel Sony IMX708 image sensor module, Camera Module 3 offers a few key enhancements over its predecessor. Improved low-light sensitivity makes for better photos and output in situations where there's not a lot of light. The module also features powered autofocus making it easier to get a sharp picture output. Finally the Camera Module 3 features High Dynamic Range (HDR) support expanding the range of color and contrast in the output.

Features

  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3 megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  • 2-wire serial control of focus mechanism

Lens Characteristics

  • Focus range: 10cm - ∞
  • Focal length: 4.74mm
  • Diagonal field of view: 75 degrees
  • Horizontal field of view: 66 degrees
  • Vertical field of view: 41 degrees
  • Focal ratio (F-stop): F1.8
  • Infrared-sensitive: No

Specifications

  • Sensor: Sony IMX708
  • Resolution: 11.9 megapixels
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/vertical: 4608 × 2592 pixels
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filter: Integrated in standard variants; not present in NoIR variants
  • Autofocus system: Phase Detection Autofocus
  • Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  • Ribbon cable length: 200mm
  • Cable connector: 15 × 1mm FPC
  • Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device Electromagnetic Compatibility Directive (EMC) 2014/30/EU. Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

Package Includes

1pc x Raspberry Pi Camera Module 3 NoIR SONY IMX708 Sensor 12MP 

View AllClose

0 Reviews

View AllClose