Description
Description:
Module Name: 4000W regulator (Premium Edition)
Module nature: SCR regulator
Operating voltage: 220V AC
Operating current: 20A (MAX) Please enhance heat dissipation when large currents.
Voltage range: 0-220V (resistive load)
Maximum power: 4000W (resistive load) the inductive load leave a margin, please .
Conversion efficiency: 92%
Short circuit protection: Yes (20A fuse)
Installation: 2 piece 3mm screws
Connection: Terminals
Module dimensions: 91 x 59 x 38mm (excluding knob)
Note: You must connect to the load before the regulator.
SCR is mainly used for resistive loads (incandescent electric wire, etc.), most of the single-phase AC motor can, but can not guarantee, other types of loads buyer to confirm their own. Fuse is not a panacea, there is reaction time, if the current is too large, in addition to burn the fuse, the module may also be burned.
Attention to fitting plastic cover due to the installation of the housing, can not be completely open, screwdriver to tighten the side with the point, the other to be careful when opened, excessive force easily snapping the lid, transmit transportation may also crushed for wearing parts, but It does not affect the module.
Package included:
1 x 4000W AC220V SCR silicon controlled electronic volt regulator