Robotlink
RAMPS 1.4 + Mega 2560 + A4988 + Motor + Extruder RepRap
- SKU:
- PETUA57
- Shipping:
- Calculated at Checkout
Description
This is a 3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model.
This is Mega Pololu Shield or RAMPS for short. The 3D Printer Controller Board RAMPS 1.4 is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty of room for expansion.
RAMPS boards can only work when connected to its motherboard Mega 2560 and A4988/DRV8825. Owning to its stability in operation and great compatibility with the most 3D printer (all RepRap-model such as Prusa i2 and i3). The combination of Ramps1.4 + MEGA2560 + A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.
The modular design includes the plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability, and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Ramps boards are the heart of most DIY 3D printers on the market and a nice clean compact way to integrate all the systems into a compact enclosure mountable format.
Features :
| CATEGORY | SPECIFICATIONS |
|---|---|
| Controller Board | RAMPS 1.4 |
| Stepper Driver Support | Supports up to 5 stepper driver modules (Pololu type) |
| Standard Interfaces | Extruder interface, I2C, SPI, RS232 (reserved for expansion) |
| MOSFET Control | 3 MOSFETs for heater, fan, and thermistor; all support PWM control |
| Protection | 5A fuse for components; 11A fuse for heated bed |
| Z-Axis Control | Supports 2 stepper motors in parallel |
| Servo Interface | Available for auto bed leveling |
| SD Card Support | Supports SD module (RAMPS SD module) |
| Status Indication | LED indicators for heater (MOSFET status) |
| Expandability | Supports additional accessories and modules |
| Driver Mounting | Pololu pin header sockets for easy replacement |
MK8 Extruder Specifications
| CATEGORY | SPECIFICATIONS |
|---|---|
| Filament Diameter | 1.75 mm / 3.0 mm |
| Extrusion Width | 0.3 mm / 0.4 mm / 0.5 mm |
NEMA 17 Stepper Motor Specifications
| CATEGORY | SPECIFICATIONS |
|---|---|
| Dimensions (L × W × H) | 42 × 42 × 40 mm |
| Step Angle | 1.8° |
| Rated Current | 1.2 A |
| Resistance | 1.7 Ω |
| Holding Torque | 0.4 N·m |
MK3 Aluminum Heated Bed Specifications
| CATEGORY | SPECIFICATIONS |
|---|---|
| Material | Aluminum (ALU) |
| Size | 214 × 214 × 3 mm |
| Cable Length | 70 cm |
| Power Support | 12V / 24V dual power |
| Components | Pre-assembled LEDs, SMT thermistors, resistors |
Package Includes:
- 1x RAMPS 1.4 Board Red
- 1x Mega 2560 R3 with usb cable
- 4x NEMA17 Stepper Motor 48mm Long, 1.2A with 720mm Cable
- 1x MK3 ALU-Heat bed with 14AWG 60cm Black and Fully Assembled LED and Resistor
- 6x Mechanical Endstop A with 70cm Cable and Retail Package
- 5x A4988 Stepper Motor Driver with Heatsink
- 1x 2004 LCD Blue Light
- 1x MK8 1.75/3.0+0.3/0.4/0.5MM complete Extruder
- 5x PLA 1.75 filament kit 5Meter/Bag (Blue,)
Related Products
Related Products
A4988 Stepper Motor Driver(with Heatsink)
Electro
Arduino Mega 2560 R3
Arduino
Arduino/MEGA 2560 USB Cable 0.5M
diymore
DRV8825 A4988 Motor Driver Control Panel Board
diymore