The resistance of 20mm GL20528 Light Sensitive Photoresistor LDR changes with the change in the ambient light exposed on the surface of the sensor. As the light on the sensor increases then the resistance across the two leads decreases. Light Dependent...

Features: CATEGORY SPECIFICATIONS Name Soil moisture sensor Size 36 × 15 × 7 mm Voltage DC 3.3–12 V Current < 20 mA; < 30 mA (output) Interface +, -, DO, AO (DO = digital output, AO = analog output) Operating...

ZFX-W9002 Thermostat Temperature Humidity ControlThe multi- Thermostat Temperature Humidity Control can incubate many kinds of eggs such as chickens, ducks, , pigeons, etc., and can be used for hatching, hatching, and brooding. 360 automatically turns...

Features: CATEGORY SPECIFICATIONS Product Type Soldering Tip Cleaner (Brass Wool Type) Cleaning Method Dry cleaning using spiral brass wool Material Brass chips (spiral stripping wool) Water Requirement No water required Temperature...

Features: CATEGORY SPECIFICATIONS Product Name TTEN TJ-228 Soldering Iron Stand + Tin Solder Wire Rack Dispenser Product Type 3-in-1 Soldering Iron Stand with Solder Wire Holder Design Compact, space-saving 3-in-1...

Features: CATEGORY SPECIFICATIONS Product Type Digital Soldering Station Model Atten ST-60 Power Rating 60 W Temperature Range 150–450 °C (°C / °F display supported) Heating Element High-performance dual-core ceramic...

Features: CATEGORY SPECIFICATIONS Product Type Digital Temperature-Controlled Soldering Iron Display Type LCD + LED indicator Temperature Control Push-button adjustment (9 preset levels) Max Temperature Up to 480°C Heating Time Reaches...

Features: CATEGORY SPECIFICATIONS Product Type USB Digital Soldering Iron Power Supply DC 5V (±10%) via USB Power Rating 10 W Temperature Range 150°C – 450°C Temperature Control Button adjustment (preset...

Features:1. There is no power supply for the pump. The power supply should be separately provided. Pump is DC pump, 3V pump, with DC3-4.5V power supply.   (cannot be used directly with 220V AC voltage)2. Large flow, durable, long life.3...

Features: CATEGORY SPECIFICATIONS Model LP02 Voltage 5 V / 2 A (supports power bank and computer USB output) Nozzle 0.7 mm Ceramic nozzle Speed Level Stepless adjust Temperature Unadjustable (supports low-temperature PCL, shows on...

Features: CATEGORY SPECIFICATIONS Device Type PZEM-004T single-phase AC voltage, current, power, and energy monitor Voltage Measurement Range: 80–260 V; Resolution: 0.1 V; Accuracy: 0.5% Current Measurement Range: 0–10 A...

Features: CATEGORY SPECIFICATIONS Product Type USB Inspection Camera / Digital Microscope / LCD Digital Microscope Display 4.3-inch HD LCD screen (on selected models) Magnification Up to 1600× (varies by model, typically 1×...

Features: CATEGORY SPECIFICATIONS Working Voltage 5 V Pins Digital output, VCC, GND, LED status indicator Dimensions 30 × 20 × 8 mm Package Includes: 1 x Limit Switch 1 x 3 pin Cable

The Official USB type C (UK PLUG) Power Supply For Raspberry Pi 4 is Latest officially launched power supply for all new Raspberry Pi 4 Model. The adapter comes with 1.5m 18 AWG captive cable with USB-C output connector. The design of the adapter with...

Features:Color: WhiteMaterial: PlasticApplication: Fit for 3D printing penPacking Includes:1x 3D printing pen holder base

Features: - Anti-slip particles on the inside of the finger sleeve- Strengthen the anti-slip effect at the fingertips- With opening, also convenient for the person who has long nails- In silicone material, durable to use- Not easy to sweat and feel...

Features: CATEGORY SPECIFICATIONS Product Type Helping Hands Soldering Tool with Magnifier Description Auxiliary tool with clips and magnifier for hands-free precision work Material Metal construction with iron base Size 170 × 140...

Features: CATEGORY SPECIFICATION Shell material PVC Color Blue Cable type UTP (Unshielded Twisted Pair) Interface type RJ-45 Core 30 AWG Transmission rate Up to 1000 Mbps (Gigabit Ethernet), 500 MHz in 10GBase-T Ethernet Cable...

Features: CATEGORY SPECIFICATIONS Product Type Inductive Proximity Switch (Non-contact metal sensor) Model LJ12A3-4-Z/BY Sensor Type Inductive proximity sensor (electronic switch) Operating Principle Electromagnetic induction detects nearby...

Features     Size: 100×150×1.6mm     1oz Cu PCB Kinsten manufacture the positive resist coated printed circuit board (PCB) for many prototyping, educational and low volume applications. Even some high...

Features: CATEGORY SPECIFICATIONS Product Type Silicon Phototransistor Material Silicon semiconductor Function Converts light into electrical current (light sensing and switching) Operating Principle Active region transistor operation...

Features: CATEGORY SPECIFICATIONS Product Name Quick Release U-Bar Toggle Clamp (Vertical Type) Holding Capacity 90 kg Material Galvanized iron Dimensions 95.2 × 46 × 154 mm Bar Opening Angle 100° Handle...

Feature: Conversion frequency and management speed. Glass core and high precision. It is kind of Resistance Electronic switches for smart devices and electronic components. The potentiometer only, other accessories demo in the picture is not...

Features: CATEGORY SPECIFICATIONS Material PLA (Polylactic Acid) Printing Temperature 190 – 220 °C Properties High strength, good toughness, low density, lightweight prints, cost-effective, low shrinkage, stable for large models,...

Features: CATEGORY SPECIFICATIONS Product Type ECG Electrode Pads Material Type Conductive gel adhesive electrodes Purpose Skin contact electrodes for ECG signal acquisition Adhesive Feature Easy to paste and remove Skin Compatibility No...

Features: CATEGORY SPECIFICATIONS Product Type Mini Infrared Remote Control Receiver Module Sensor Type IR receiver (PIN photodiode + preamplifier integrated) Operating Principle Detects modulated infrared signals from remote controls and...

Features: CATEGORY SPECIFICATIONS Product Type Nextion Expansion Board Compatibility Nextion Enhanced HMI Display only GPIO Support Supports up to 8 GPIO (via Enhanced display) Control Buttons 6 Buttons (Esc, Enter, Left, Right, Up,...

Features: CATEGORY SPECIFICATIONS Product Name Cutting Mat Model A3 Material High-quality PVC Color Green Dimensions 45 × 30 × 0.3 cm (L × W × T) Weight 330 g Surface Type Self-healing, double-sided Grid...

Features: CATEGORY SPECIFICATIONS Product Name 5.2V USB Fast Charge Buck Converter Module Module Type DC-DC Step-Down (Buck) Converter Conversion Type Synchronous Rectification Input Voltage Range 9V – 36V DC Output Voltage 5.2V...

Features: CATEGORY SPECIFICATIONS Product Name 5050 Round 16 Full-Color LED Module Model WS2811 Integrated LED Module LED Type 5050 RGB Full-Color High Brightness LED LED Quantity 16 LEDs (Round Arrangement) Diameter 60 mm Chip...

 Features: 1. RosBot is a motherboard based on Scratch3.0 design2. Based on UNO motherboard, on board 2 dual H-bridge motor drives3. Can be upgraded with Raspberry Pi 2, Raspberry Pi 3B+, and Intel UP Board single board computer4...

Features: CATEGORY SPECIFICATIONS Product Type LiPo Power Supply Module (LilyPad Compatible) Function Step-up power supply for wearable electronics Input Source Single-cell 3.7V LiPo battery Output Voltage 5V Max Output Current Up to 150...

The CJMCU card is a circular miniature card of about 25mm in diameter. It does not have any connection pin, intended for the applications of electronic clothing, we will simply connect the different components of the project (switch, button cell...

The LilyPad Simple just got a whole lot... simpler. We've updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it's running a variation of the latest and...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Pixel Board (RGB LED Module) LED Type WS2812B (NeoPixel with integrated WS2811 driver) Function Addressable RGB LED for wearable electronics Control Method Single-wire digital...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Tri-Color LED Module LED Type RGB LED (Tri-Color) Configuration Common Anode Control Method Ground individual R/G/B pins to activate colors Color Capability Red, Green, Blue (mixable...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Coin Cell Battery Holder Module Battery Type CR2032 (20mm coin cell) Function Power supply module for wearable electronics Switch Type Onboard slide switch (inline power...

Features： CATEGORY SPECIFICATIONS Product Name Digital Temperature & Humidity Monitor Device Type Indoor Environmental Monitor Temperature Range -50°C to 70°C Humidity Range 10% – 90% RH Temperature Resolution 0...

Product Description Get ULINK2 here:1. first install the MDK software in the CD, the first use of ulink2 driver will automatically install ulink2 driver here: C:\\Keil\\ARM\\ULINK (Keil default installation directory);2. Ulink2 connects to the...

Feature: 1. This is a super mini solar Lipo charger based on a single lithium battery charging management chip CN3065.2. This Solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device...