Frequently bought together:
Description
Features:
| CATEGORY | SPECIFICATIONS |
|---|---|
| Product Description | Updated TB6600 4A two-phase stepper motor driver; supports positive and negative control |
| Microstep Selection | 7-step subdivision control (1, 2/A, 2/B, 4, 8, 16, 32) via 3-digit DIP switch |
| Compatible Motors | 57, 42 two-phase, four-phase hybrid stepping motors |
| Drive Characteristics | Low vibration, low noise, high-speed motor drive |
| Motor Drive Type | H-bridge bipolar constant phase flow driven |
| Output Current Options | Eight options, maximum 4.0 A |
| Subdivision Modes | 6 modes available, up to 32 segments |
| Input Signal Isolation | High-speed optical isolation |
| Offline Hold Function | Yes |
| Chassis | Semi-enclosed, suitable for harsher environments |
| Current Lock Function | Energy-efficient semiautomatic current lock |
| Protection Features | Built-in temperature protection and overcurrent protection |
| Input Voltage | DC 9-40V |
| Recommended Input Current | 5 A (switching power supply) |
| Output Current Range | 0.5–4.0 A |
| Maximum Power | 160 W |
| Subdivision Steps | 1, 2/A, 2/B, 4, 8, 16, 32 |
| Operating Temperature | -10~45°C |
| Storage Temperature | -40~70°C |
| Humidity | No condensation, no water drops |
| Environmental Restrictions | No flammable gases or conductive dust |
Package Includes:
1 x TB6600 upgraded stepper motor driver
1 x TB6600 upgraded stepper motor driver
1 Review
-
TB6600 9-42VDC STEPPER MOTOR DRIVER
the driver works okay but the chip inside is not tb6600 which has a bigger form factor . the chip inside has a small form factor and that affects heat dissipation , otherwise i havent had any issue with it so far. thanks
Related Products
Related Products
ULN2003 Stepper Motor Driver
Dikavs
KES150.00
Description:
Rated Voltage: DC5V4-phaseReduction Ratio: 1/64Step Torque Angle: 5.625/64DC Resistance: 200±7% (25)Insulation Resistance: >10M (500V)Dielectric Strength: 6
TB6560 3A Stepper Motor Driver
Deek-Robot
KES1,200.00
Features:
CATEGORY
SPECIFICATIONS
Size
75 × 50 &t
A3967 EasyDriver Stepper Motor Driver
Deek-Robot
KES500.00
Overview:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver)...
ULN2003 Stepper Motor Driver Board
diymore
KES150.00
Description:
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and...
SOLD OUT
A4988 Stepper Motor Driver(with Heatsink)
Electro
KES200.00
Features:
CATEGORY
SPECIFICATIONS
Product Name
A4988 Microstepping M