VERIFICATION OF P, P+I, P+D, P+I+D CONTROL - Order Code 52233

SPECIFICATION

KEY WORDS:

1. Feedback control.
2. Temperature control.
3. PID control.
4. P, P I, P I D Controller Action.
5. SCADA Based Control

Features

1. Compact Ergonomic Design.
2. User Friendly, Self Explanatory Systems.
3. Electrical control panel with temperature cabinet.
4. Enhanced Electrical Safety Considerations.
5. Training Manuals, Mimic Charts for Operation Ease.
6. Inbuilt Safety Measures to avoid improper usage.
7. Computer Interface & SCADA software connectivity for analysis of Temperature Control System Trainer (Optional)

Range of Experiments:

1. Study of single loop proportional, integral and derivative control.
2. Study of operation and calibration of transmitters.
3. Study of stability of Temperature control loop.
4. Configure micro controller based PID to give manual output, change controller mode as Manual Or Auto, give ON-OFF, proportional, integral, derivative PI and PID control, change local set point, Configure and run a set point ramp, configure measured values to either percentage or temperature.
5. Demonstrate the use of RTD (or a transmitter) for the measurement of temperature of flowing air and a heater.
6. Show the operation of a thyristor to control the energy input to an electrical heater.
7. Demonstrate the proportional control of temperature, with offset, overshoot, instability and optimum value of proportional band or gain.

Download Catalogue
Download PDF