null
TESCA

Flow Control Trainer (with turbine flowmeter) w/o Optional 52201 to 52204 - Order Code 52221

(No reviews yet) Write a Review
SKU:
52221
Shipping:
Calculated at Checkout
KES0.00
Frequently bought together:

Description

SPECIFICATION

Flow Control Trainer is the system, which outlines the basics of Closed Loop Flow Control and various aspects related to it.

KEY WORDS:

  1. Feedback Flow control.
  2. ON-OFF & PID control.
  3. OPEN/CLOSE loop response.
  4. MANUAL/AUTO tunning of controller
  5. SCADA Based Flow Control
  6. P, P+I, P+I+D Controller Action.
  7. TRANSIENT response analysis study.
  8. USB/RS 232 / Ethernet/ Modbus
  9. Communication
  10. Ability to hook up with DCS (Distributed Control System Trainer)

Range of experiments:

  1. Study of single loop Proportional (P), Integral (I) and Derivative control (D).
  2. Study of operation and calibration of transmitters, I/P converter and Control Valve.
  3. Study of OPEN LOOP/CLOSE LOOP TUNNING & AUTO TUNNING of controller.
  4. Study of STEP response & Transient response of controller (process curve).
  5. Study of programming and operation of PID controller.
  6. Study of stability of single loop Flow Control System.
  7. Configure microcontroller based controller to give manual output, changing controller modes (Manual/Auto), Checking ON-OFF, Proportional(P), Integral(I), Derivative(D) , PI(P+I) and PID (P+I+D) control actions, change local Set point, configure and run a set point ramp, configure measured values to either percentage or Engineering units.
  8. Auxiliary experiments
  9. Study of SCADA Application Software/ Computerized Control of Flow Control System.

Features: -

  1. Understand the concept of feedback FLOW control loop.
  2. User Friendly, Self Explanatory Systems.
  3. Leak proof Safety Measures, sturdy piping.
  4. Enhanced Electrical Safety Considerations.
  5. Training Manual & Mimic Charts for Operation Ease.
  6. System Frame with Caster Wheel Arrangement for ease in movement.
  7. M.S. powder coated cubical plant with standard Instrument Mountings.
  8. Inbuilt Safety Measures to avoid improper usage.
  9. Computer Interface (Optional), SCADA Application software connectivity for analysis of Flow
  10. Control System Trainer.
  11. System Dimensions: 4 Ft. (L) X 2Ft. (W) X 4.5 Ft. (H)
  12. Weight: Approx.70 Kg
  13. Services Required:
  14. Water supply and drainage arrangement.
  15. Electric supply 1φ 230 V AC, 50 Hz.
  16. Clean, dry and dust free Compressed air supply 2.1 kg/cm2.
  17. Laptop/desktop computer (for SCADA)

Technical Specification

Sump tank-

Material: Stainless Steel, 1.5 mm thick /P.P.5mm thick, with top cover, Capacity: 30 liter, Dimension: 1 ft (L) ×1ft (W) ×1 ft (H).

Piping-

1/2” GI, Class B, with 1/2” SS ball valves: 6 No.

Centrifugal Pump-

1/2 HP, 1f 230 V AC supply, Surface mounting

Flow meter-

Type: Turbine Flow Meter

Range: 0-600/0-1000 LPH, Output: 4-20 mA, Supply: 24 V DC 100 mA, Mounting: Horizontal, Connection: 1/2.”

Pneumatic Control valve-

Size: 1/2”, Type: Two way Globe type (Air to Close), Cv: 5 US GPM, with diaphragm actuator, equal% characteristics, Flange connection : PCD 60

mm, ID: 16 mm, OD: 90 mm.

Rotameter

Range: 100-1000 LPH, Glass Tube Type/ Acrylic body. Connection: 1/2”,

Bob Material- SS 304, Mounting: Inlet- Bottom, Outlet- Top.

E/P Converter

Input: 4-20 mA, Output: 3-15 psi, Connection: 1/4"NPT / BSP,

Supply: 2.1 Kg/cm2

A.F.R /F.R.L. UNIT-

Air Filter, Regulator & Lubricator, 0-10 Kg/cm2 with pressure gauge, Connection 1/4’’ NPT / BSP.

Power Supply

24 V DC, 3 A, Size: 48mm×126mm×68mm.

Electronic PID Controller-

With Serial PC Interface (ASCII/MODBUS Protocol) USB / Ethernet / RS 485 / RS232, for SCADA option only, Cut Out Size: 92mm×92mm×144mm, Input:4-20 mA, Output; 4-20 mA, Display: Dual for PV & SP, High-Low Alarm annunciation, Bar graph display (Optional)

Electrical Control Panel

MS Powder coated panel with switches, indicator, test Points, controller on front facia, UK 2.5 Terminal Connectors mounted on DIN rail channel, Use of

0.5 sq. mm multi-strand wire with proper insulated Lugs, Feruling & neat wire dressing & clamping, Wires & power cables are seated through 1”×1” PVC cable tray. Dimension: 1ft (L) ×1ft (W) ×1ft (H)

52202 SCADA Application Software (Optional)

SCADA Application S/W, PID control setting (P, PI, PD and PID mode), Auto/Manual Tuning of PID, Data Storage, Off Line analysis, online Data Acquisition, Simulation and Printing of data in Graphical and Tabular form. Interactive Graphical User Interface (GUI) included

52201 Computer (Optional)

PC with color monitor: 18.5’’, Intel Core i3, 500 GB HDD, 4GB RAM, Keyboard & Mouse, DVD Writer, With supporting OS and Communication port.

 

52203 Air Compressor (Optional)

Tank capacity: 25 Liters, Discharge: 2 CFM, Motor: 1 H.P. 230 V AC Operated,Max.Pressure:8-10Kg/cm^2 Working pressure: 5-6 kg/cm2

 

Download Catalogue

View AllClose

0 Reviews

View AllClose

Related Products

Related Products