Digital-Analog Training System - Order Code 33503B

Order Code: 33503B
Name: Digital-Analog Training System

Tesca 33503B Digital – Analog Training System is a versatile equipment designed for elementary as well as advance training of Digital and Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard through use of 2mm brass terminals and patch cords. Various function generators, logic level output indicators, multimeters and AC & DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords and comprehensive Instruction manual.

Features

1. Regulated DC Power Supply : ±5 V at 0.2 Amp, +12 V/ 0 to 20V at 0.2A, and -12 V/ 0 to -20 V   at 0.2 A
2. AC Supply : 5-0-5V, 10-0-10V at 100mA. Can be used as 5V, 10V and also as   center tap 
3. Multimeter : 2 Nos of on-board multimeters to measure AC & DC Voltage,    Current, Resistance, diode and Continuity, etc.
4. Function Generator : Sine / Square / Traingular / Pulse waveform frequency 1 Hz to 110   Khz in 5 Steps. Variable in between steps. Sine / Square /   Traingular waveform output 50mV ~ 10Vpp variable
5. Variable Resistors : 2 Potentiometers (1K, 100K)
6. Speaker : 8 ohms miniature speaker
7. Seven Segment Display : 2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
8. Data Switch : 8 independent logic level inputs to select High / Low TTL levels
9. Pulser Switch : 2 independent buffered bounce free manual pulser (useful for   freezing the action of each stage of the counter after every clock   pulse)
10. Logic Indicators : 8 independent LEDs indicators for High / Low status indication of   digital outputs
11. Universal Socket : 3 Nos. BNC to 2 channel banana adapter
12. Fuses : 3 Nos. of Fuses with terminals
13. Bread Board : Unique solder-less large size, spring loaded breadboard consisting   of two Terminal Strips with 1280 tie points and 4 Distribution Strip   switch 100 tie points each, totaling to 1680 tie points.   (Size:112mmx170mm)
14. Power : 230 V ± 10%, 50 Hz
15. Accessories : Mains cord, Operating and Experimental manual
16. Instruction manual : Strongly supported by detailed operating instructions
17. Weight : 6 Kg. (Approx)
18. Dimension : W 400 x H 150 x D 300

EXPERIMENTAL COVERAGE:
ANALOG

1. Study of Diodes in DC circuits
2. Study of Light Emitting Diodes in DC     Circuits
3. Study of Half wave rectifier
4. Study of Full wave rectifier
5. Study of Zener Diode as a voltage     regulator
6. Study of transistor series voltage regulator
7. Study of transistor shunt voltage regulator
8. Study of Low pass filter
9. Study of High pass filter
10. Study of band pass filter
11. Study of CE configuration of NPN transistor
12. Study of CB configuration of NPN transistor
13. Study of CE amplifier
14. Study of Monostable multivibrator using transistor
15. Study of Bistable multivibrator using transistor
16. Study of Astable multivibrator using transistor

DIGITAL

1. Logic gates operation
2. To verify De-morgan’s theorem With boolean logic equations
3. Binary to Gray code conversion
4. Gray code to Binary conversion
5. Binary to Excess-3 code conversion
6. Binary Addition and Subtractor
7. Binary Multiplier
8. EX-OR gate implementation
9. Application of EX-OR gate
10. Johnson Counter
11. To verify the dual nature of Logic Gates
12. Study of Flip-Flops RS, JK, D&T
13. Multiplexer and Demultiplexer
14. 4 Bit Binary up and down counter
15. Study of 8 to 3 Line Encoder
16. Study of 3 to 8 Line Decoder
17. Study of Shift Register (SIPO)
18. CMOS-TTL Interfacing
19. Study of Crystal oscillator
20. Study of pulse stretcher circuit

For Product Catalog click below
Download PDF