Analog Electronics Lab Set Up - Order Code 33502A

SPECIFICATION

The course in Basic Analogue Electronics is an excellent introduction to electronics. The Laboratory Package consists of the Base Unit and five laboratory cards. 
The Base Unit serves as a card holder and as a power supply with fuses for the laboratory cards. The Laboratory Package covers the basics in electronics, with special emphasis on the system method. 
Laboratory card 4 is the most intricate and contains a power supply with which the student can learn the difference between component functions and to practice trouble shooting (fault finding), in order to get a better understanding of the system. 
The educational package in Basic Analogue Electronics includes a Laboratory Exercise Book. Every effort has been put into the layout and teaching methods. 

The course objectives are: 

• To understand the function of the components, identify them and connect them in simple circuits. 
• To complete fault finding and to be able to use the measurement exercises using Lab Card 5. 
• To complete a construction set which, after completing successive stages results in a DC voltage unit.

TOPICS COVERED 
Basic Electronics covers the following topics using the M00002-M00006 as indicated in brackets: 

• Identifying and measuring resistors (M00002) and capacitors (M00003) 
• The diode (M00004) 
• Full and half wave rectification (M00005) 
• Filtering (M00005) 
• Voltage stabilisation (M00005) 
• The light emitting diode, LED (M00005) 
• Transistor currents and voltages (M00006) 
• Current amplification with transistors (M00005) 
• The transistor as a regulating component (M00005) 
• Current limitation (M00005) 
• Fault detection (M00006)  

BASE UNIT - Order Code - M00001 

The Base Unit is used throughout the system M00001. The unit supplies different output voltages suitable for the different lab cards used in the system. The Lab Cards put in slots and are automatically powered via a D-sub connector. 
The base unit is accepted by CE standards. 

TECHNICAL SPECIFICATIONS 

Supply voltage : 220 - 240V AC 50 - 60 Hz 
The unit has 6 outputs with following data: 
Output 1 - 3 : DC 12 V / 3 A with LED indication and fuse 
Output 4 - 6: AC 12 V / 3 A with LED indication and fuse 
Dimension: 200 x 300 x 73mm 
Weight: 4 kg Approx

RESISTOR  MODULE - Order Code - M00002 
On Resistor Module there are 12 different hole mounted resistors, 2 potentiometers and 2 surface mounted (SMD) resistors. 
With this card, measurement of components can be made, also recognition of values from the resistor code.  

TECHNICAL SPECIFICATIONS 
Dimension: 190 x 110 mm 
Weight: 1Kg Approx

CAPACITOR MODULE - Order Code - M00003 
On Capacitor Module there are 15 different hole mounted capacitors, 1 trimming capacitor and 4 surface mounted (SMD) capacitors. 
With this card measurement of components can be made, recognition of different types of capacitor. 

TECHNICAL SPECIFICATIONS 
Dimension: 190 X 110 mm 
Weight: 1Kg Approx 

DIODE MODULE - Order Code - M00004 
Diode Module is used for measurement and documentation of the characteristics of diodes. A variable resistor 100 ohm is required to complete the exercises. 

TECHNICAL SPECIFICATIONS 
Dimension: 190 X 110 mm 
Weight: 1Kg Approx 

VOLTAGE REGULATOR MODULE - Order Code - M00005 
This is a stabilised DC voltage unit having different possibilities for connection. Measurement exercises include full and halve wave rectifiers, zener diodes, light emitting diodes (LED´s), transistors and electronic current limiters. There is also possibilty to train in fault finding. 

TECHNICAL SPECIFICATIONS 
Variable output voltage approx. : 7-12V DC. 250 mA. 
Dimension: 190 x 110 mm 
Weight: 1Kg Approx 

TRANSISTOR MODULE - Order Code - M00006
This card is used for measurement of the transistors current, voltage, power development, and function control.  

TECHNICAL SPECIFICATIONS 
Dimension: 190 X 110 mm 

STORAGE RACK 1 ROW - Order Code - M00010
Storage rack for safe storage of the lab cards. It is constructed of hard plastic and very durable. 

Technical Data: 
Dimension: 150 x 250mm Approx
Weight: 1.4 kg  Approx

RHEOSTAT MODULE - Order Code - M00009
The rheostat is enclosed in a robust metal case. The back, bottom and top of the case are perforated to provide optimum cooling. 
Two glass fuses protect the resistor against excessive current and incorrect connection. A scale having 100 divisions indicates the resistance setting. 

TECHNICAL SPECIFICATIONS 
Power: 100W,  Resistance: 100 Ohms,  
Max Current: 1 A 
Dimension: 000 x 000 x 000 mm .

DIGITAL CONNECTION BOARD - Order Code - M00007
This breadboard is easily connected to 2 contact plugs. The board is suitable for projects where the student connects up circuits on this unit for testing. 

TECHNICAL SPECIFICATIONS 
Dimension:190 x 110 mm  
Weight: 1Kg Approx 

POWER AMPLIFIER MODULE - Order Code - M00008 

The topics covered by Lab Card Operational Amplifier, are the following exercises and experiments: 
• Operational Amplifier  • Non Inverting Amplifier 
• Voltage Follower  • Inverting Adder 
• Comparator  • Non Inverting Adder 
• Inverting Amplifier  • Different Amplifiers 

Technical data: 

Dimension: 190 X 110 mm  Weight: 0.2 kg 
LAB FLEX SET SHROUDED PATCH CORDS - Order Code - M00011 
Set of 100 leads in 5 different colours,red, yellow, blue and yellow/ green. 5 each of 4 different lengths, 25, 50, 100 and 200 cm. Area: 1.5 mm2 
The pin is protected by a plastic sleeve when the flex is not connected. The plastic sleeve is pushed in to the flex when the plug is connect­ed to the equipment. 

MANUAL FOR 33502A - Order Code - M00012
Contents:

• Identification & measurement of  resistors
• Identification & measurement of capacitors
• The diode
• Half wave rectifiers
• Filtering
• Full wave rectifiers
• Voltage stablising with a Zener diode
• Light emitting diode (LED)
• Transistor, current and voltage amplification
• Current amplification with transistor
• Transistor as a regulater component
• Current limiters
• Function test

For Catalog click below
Download PDF