Frequently bought together:
Description
APM 2.8 Flight Controller w / Shock Absorber M8N GPS 5 V 3A Power Module T Plug
APM2.8 Features:
- This is a new APM 2.8 autopilot unit. The sensors are exactly the same with APM2.6, but this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.
-APM 2.8 is a complete open source and bestselling autopilot system that won the prestigious 2012 Outback Challenge UAV competition. It allows the user to convert any fixed, rotary wing or multirotor vehicle (even cars and boats) into fully independent vehicles; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.
- This board review has no on-board compass, which is its design for cars (especially multicopters and rovers) so the compass must be placed with as many energy and kinetic sources as possible to avoid magnetic interference. (On fixed wing aircraft it is often easier to install APM far enough from motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that locations and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with the compass (see option below), so that the GPS / Compass unit can be mounted further from the noise sources than the APM itself.
Features:
- Arduino Compatible!
- Can be ordered with top entry pins to connect connectors vertically, or as side entry pins to slide connectors at either end horizontally
- Includes 3-axis gyro, acceleration and magnetometer, along with a high performance barometer
- Onboard 4MB Dataflash chip for automatic datalogging
- Optional outside GPS board, uBlox LEA-6H unit with compass.
One of the first open source autopilot systems to use the Invensense 6 DoF Acceleration / Gyro MPU-6000.
- Atmospheric pressure sensor upgraded to MS5611-01BA03, from measurement majors.
- Include ATMEGA2560 and ATMEGA32U - 2 chips for processing and USB functions respectively.
About power unit:
The power unit is a simple way to provide your APM / Arduflyer with clean power from the lipo battery as well as current consumption and battery voltage measurements, all through a 6 P cable. On-board switching output regulator 5.3 V and a maximum of 3A from up to 6 S lipo battery. Special for APM2.5.2 APM2.6 Pixhawk flight controller
Note: The power unit is only designed to operate the APM / Arduflyer, the RC receiver and accessories (GPS, radio metering). It is not designed for machine operation. Use your own ESC / BEC aircraft for that.
Features:
XT60 Plug
Max input voltage: 30V
Max current sensor: 90A
Voltage and current measuring composition for ADC 5V
Switching Output Regulator 5.3 V and 3A Max
6 P Molex cable plugs directly to APM / Arduflyer 2.5's 'PM' connector
About neo-M8N GPS
Built-in compass and GPS module
- Main chip: NEO-M8N
- With fast space search speed and high resolution
- Includes round plastic shell
- Package size: 15 * 12 * 2cm / 6 * 4.8 * 0.8in
- Package weight: 57g / 2.0oz
Packing content:
1 x APM 2.8 Flight Controller w / Case and Conjoined Shock Absorber
5 x cables
1 x 5V 3A Power Module XT60 Connector x 1
1 x NEO-M8N GPS
1 x GPS support
Related Products
Related Products
SOLD OUT
ArduPilot APM 2.8 Flight Controller Board
Readytosky
KES4,500.00
Description - This version eliminates the 1.0mm 6P SM06B GPS interface of V2.52 old version, and change it into DF13-4P I2C external compass interface.- Put DF13-5P GPS interface with external...
2.4.8 Pixhawk PX4 Flight Controller
Readytosky
KES16,000.00
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;- Integrated backup power supply and failure backup controller, the main controller can be...
SOLD OUT
NAZE32 REV6 Flight Controller 6DOF Version
Readytosky
KES2,000.00
The new NAZE32 REV6, compared REV5 greatly optimized PCB layout, better wiring, and the sensor portion also made a very big evolution, modification, using a new generation of more accurate sensors.
APM 2.8 Flight Controller Board with Compass
Readytosky
KES8,000.00
APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5, 2.6; with a Built-in Compass for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller; however, the...
SOLD OUT
NB One +Flight Controller + GPS Module
Readytosky
KES6,500.00
A fixed-wing flight control with a barometer, measuring the height hrough a barometer,
then a key to get Rescue function ! Release all the joysticks of the remote control in the high mode, and...
SOLD OUT
Naze 32 REV6 Flight Controller with Compass & Barometer
Readytosky
KES3,000.00
Naze 32 Full REV6 Flight Controller with Compass & Barometer is the newest version, rev6, of the popular Full Naze32 flight controller board by Abuse Mark Made in JAPAN. At the heart of the...