Frequently bought together:
Description
Features At A Glance
- 240×240 resolution, 65K RGB colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| OPERATING VOLTAGE | 3.3V / 5V | RESOLUTION | 240 × 240 pixels |
| COMMUNICATION INTERFACE | 4-wire SPI | DISPLAY SIZE | Φ32.4mm |
| DISPLAY PANEL | IPS | PIXEL SIZE | 0.135 × 0.135mm |
| DRIVER | GC9A01 | DIMENSIONS | 40.4 × 37.5mm Φ37.5mm |
Controlled Via SPI Bus
Supports Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
| VCC | Power (3.3V / 5V input) |
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Hardware Connection
Connecting With Raspberry Pi
Connecting With Arduino Board
Living Example
Outline Dimensions
Related Products
Related Products
SOLD OUT
Raspberry Pi 10.1" Capacitive Touch Screen LCD
Waveshare
KES16,500.00
Waveshare 10.1 inch HDMI LCD display has IPS display panel and a screen resolution of 1280 x 800. This display has a capacitive touch-type screen and toughened glass touch panel with a 6H hardness...
SOLD OUT
1601A LCD Display Module
Hesai
KES400.00
Specification:
Dimensions: 80.0x36.0x13.0mm
Sight size: 64.5x13.8/16.0 mm
Point size: 0.55 X0.6 (w*h)
Character size:
EGS002 EG8010 LCD Module
Hesai
KES700.00
Overview:
EG8010 is a digital function, very well brought its own sine wave inverter generator chip dead-time control, used in a two-stage DC-DC-AC power conversion structure or DC-AC DC frequency...
RGB LED Module 3 Color Light
diymore
KES200.00
RGB LED module LED is made of a plug-in full-color, by R, G, B three-pin PWM input voltage can be adjusted in three primary colors (red / blue / green) strength in ord
LilyPad Tri-Color LED RGB Module
LilyPad
KES200.00
Description:
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a...
SOLD OUT
1602 Yellow LCD Display Module
Hesai
KES250.00
16-character x 2-line LCD display (1602 or 16X2), easy to install and compatible with Arduino, Raspberry and any Microcontroller platform, 100% compatible with any LCD Library of compilers on the...