null
Robotlink

Arduino UNO R4 WiFi Generic Board

(No reviews yet) Write a Review
SKU:
PEUNO97
Shipping:
Calculated at Checkout
  • Arduino UNO R4 WiFi Generic Board
  • Arduino UNO R4 WiFi Generic Board
UGX111,036.30

SOLD OUT

Frequently bought together:

Description

The Arduino UNO R4 WiFi is the first UNO board to feature a 32-bit microcontroller and an ESP32-S3 WiFi module (ESP32-S3-MINI-1-N8). It features an RA4M1 series microcontroller from Renesas (R7FA4M1AB3CFM), which embeds a 48 MHz Arm® Cortex®-M4 microprocessor. The UNO R4 WiFi’s memory is larger than its predecessors, with 256kB flash, 32kB SRAM and 8kB data memory (EEPROM). The RA4M1’s operating voltage is fixed at 5VDC, whereas the ESP32-S3 module is 3.3VDC. Communication between these two MCUs is performed via a logic-level translator. Furthermore, this versatile board boasts a convenient on-board 12×8 LED matrix, a Qwiic connector, VRTC pin, and an OFF pin, covering all potential needs makers will have for their next project.

Features:

CATEGORY SPECIFICATION
Board Type Arduino UNO R4 WiFi (Clone – Not Original Arduino)
Main Microcontroller Renesas R7FA4M1AB3CFM (48 MHz Arm® Cortex®-M4 with FPU)
WiFi Co-Processor ESP32-S3 (ESP32-S3-MINI-1-N8)
Flash Memory (Code) 256 KB
SRAM 32 KB
EEPROM / Data Flash 8 KB
Input Voltage (DC Jack) 4V – 18V DC
Operating Voltage RA4M1: 5V, ESP32-S3: 3.3V
USB Connector USB Type-C
Digital I/O Pins 14 (D0 – D13)
Analog Input Pins 6 (A0 – A5)
PWM Pins 6 (D3, D5, D6, D9, D10, D11)
Communication Interfaces 1× UART, 1× I2C (SDA/SCL), 1× SPI, 1× CAN (external transceiver required)
Peripherals Capacitive Touch Unit, USB 2.0 Full Speed (HID support), RTC with VRTC pin, 14-bit ADC, 12-bit DAC, Operational Amplifier
Extra Features 12×8 Red LED Matrix (96 pixels), OFF power pin, DIP switch to switch USB between RA4M1 and ESP32-S3
Operating Temperature -40°C to +85°C
Dimensions ~68.58 × 53.34 × 15 mm

Package Includes:

  • 1 x Arduino UNO R4 WiFi (Generic)
  • 1 x Cable

View AllClose

0 Reviews

View AllClose