Features: CATEGORY SPECIFICATIONS Product Type LM393 Photoresistor Light Intensity Sensor Module Sensor Type Light Dependent Resistor (LDR / photoresistor) Main Chip LM393 voltage comparator Function Detects ambient light intensity and...

Features: CATEGORY SPECIFICATIONS Product Type Alcohol / Ethanol Gas Sensor Module Model / Sensor Type MQ-3 (ZYMQ-3 sensing element) Detection Gas Ethanol (Alcohol vapor) Operating Principle Tin dioxide (SnO₂) conductivity increases with...

Features : CATEGORY SPECIFICATIONS Product Type Combustible Gas Sensor Module Model / Sensor Type MQ-5 (SnO₂ gas sensing element) Detection Gases LPG, Methane (CH₄), Propane, Coal gas, Natural gas Detection Principle Tin dioxide (SnO₂)...

Features: CATEGORY SPECIFICATIONS Product Type Carbon Monoxide (CO) & Combustible Gas Sensor Module Model / Sensor Type MQ-9 (SnO₂ gas sensing element) Detection Gases Carbon Monoxide (CO), Methane (CH₄), LPG, Propane Detection Range...

Features: CATEGORY SPECIFICATIONS Product Type Carbon Monoxide (CO) Gas Sensor Module Sensor Type MQ-9 (SnO₂ semiconductor gas sensor) Target Gas Carbon Monoxide (CO) Detection Range 10 – 1000 ppm CO Operating Principle Change in...

Features: CATEGORY SPECIFICATIONS Product name MQ135 gas sensor module Sensor type Gas sensing module based on MQ135 sensing probe Main chip MQ135 gas sensing probe Size 32 × 20 × 22 mm / 1.25 × 0.78 × 0.86...

Features: CATEGORY SPECIFICATIONS  Sensor Name BMP180 (GY-68 Module) Technology Piezo-resistive pressure sensor Compatibility Successor of BMP085, compatible functions Supply Voltage 1.8V – 3.6V DC Interface I2C (up to 3.5...

Features: CATEGORY SPECIFICATIONS Product name Waterproof digital temperature sensor Sensor type DS18B20 (1-wire digital) Features Pre-wired, waterproof; suitable for long-distance measurement; no signal degradation; unique 64-bit ID for...

Features: CATEGORY SPECIFICATIONS Sensor Name BMP280 (GY-BMP280-3.3 Module) Type Environmental sensor – temperature + barometric pressure Chip BMP280 Power Supply 3.0V DC Interface I2C or SPI (standard protocols) Pressure Range 300...

Features: CATEGORY SPECIFICATIONS Product name DHT11 temperature and humidity sensor Sensor type Digital temperature and humidity sensor Operating voltage 3V ~ 5V Operating current 2.5 mA max (during conversion) Temperature range 0°C...

Features: CATEGORY SPECIFICATIONS Product name AM2302 (DHT22) temperature and humidity module Sensor type Digital temperature and humidity sensor Operating voltage 5V Interface Single-bus digital (two-way) Temperature range -40°C ~...

Features: CATEGORY SPECIFICATIONS Product Type 13.56 MHz RFID/NFC Reader Module Technology Near Field Communication (NFC) / RFID Operating Frequency 13.56 MHz Function Reads and communicates with NFC/RFID smart cards Operating Voltage DC...

Features: CATEGORY SPECIFICATIONS Product Name Rotary Encoder Module Module Type Digital Control Input Module Material Electronic Components + PCB Color Black Dimensions 31 × 19 × 29 mm Working Voltage 5V Pulse Count 20...

This is a new mobile robot called Sloth developed by the SunFounder company. It is made by the SunFounder Nano board as control board and compatible with Arduino Nano board. Each leg has 2 joints driven by servo and is very flexible. It can not only do...

Description The HT 12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of N address bits and 12-N data bits. Each address/data input is externally trinary...

Description: AD Analog Keyboard Module Electronic Building Blocks For , port is compatible expansion board sensor analog keyboard,5 keys only takes an analog port , save resources , analog acquisition , press different keys output different voltage ,...

Features: CATEGORY SPECIFICATIONS Product Name SDS011 Laser Dust Sensor Sensor Type Laser-based particulate matter (PM) sensor Measured Quantities PM2.5 and PM10 particle concentration (μg/m³) Detection Range 0.3 µm –...

Features: CATEGORY SPECIFICATION Cable type Flexible flat cable Length 50 cm Material Plastic and metal Pin count 15 pin Use for Raspberry Pi Camera module   Package Includes: 1 x 200cm Flexible Flat Cable

S500 Quadcopter Frame Kit W/ PCB Central Plate F450 quadrotor upgrade. Arm design learned from DJI S800 EVO, and improved Good FPV work with Gopro Hero 3 for 2-axis brushless gimbal. If the PCB version, the center plate is with the soldering...

FPV 5.8Ghz 600mW 48 Channels Wireless A/V transmitter and receiver TS832+RC832 plus Tx & Rx Set for aircraft 5KM range Description: Boscam has forged a reputation of quality and reliability and has been tested and developed by FPV pilots...

Specification:Item name :Universal Motor Cover ProtectionSuitable for 22 Series MotorsTotal weight:22gPackage size:150mm*90mmColor :Black,Red,GreenPackage Included:4 X Motor Cover4 X M3*8 Screw set

Specifications:Color: BlackMaterial: PlasticDimensions: 95 x 55 x 35mmCharging number of batteries: 2-3cellsInput voltage: 110-240V ACMaximum charge current: 1.5A (2S) 1A (3S)Charging Display: Through three LED lights, red and greenLED indicator shows:...

Description: The use of the N45 high performance magnet, fixed plate made of carbon fiber board material Maglev-method was adopted on the center fixing axis to balance the tested products...

Features: CATEGORY SPECIFICATIONS Product Name 42 Stepper Motor Model 42HD4027-01 Size 42 × 42 × 40 mm Length 40 mm Weight 275 g Wire Port 6 pins female PH2.0 Number of Phases 2 Step Angle 1.8° Holding Torque 400...

Features: - Center lower plate: 1-4pcs 45 * 45mm flight control board (FF, kk, rabbit, pirate, MWC, etc.) - With Extend board, the ESC parallel plates or 4-in-1 ESC can be installed on it. - With mounting holes for Wireless Transmitter ,CCD,OSD,GPS...

It’s usual that when a drone crashes, the impact mainly affects the Arms of the drone. Because of this concern, it is ideal that a drone should have detachable arms to provide a wide lifecycle to the Multirotors. This Replacement Arm is made from...

High Definition Display: This fpv camera is with 700TVL definition. High quality video, low RF interference. It will give you good images during day and night.Small and Lightweight Design: Signal System NTSC/PAL Switchable on OSD menu,net weight 5.5g....

This is all new High Definition 1200TVL CMOS Camera 2.8mm Lens FPV Camera for FPV RC Drone Quadcopter. It adopts 1/3CMOS SUPER HAD II Image sensor, low illumination reaches up to 0.01Lux/1.2F,  easy to setup parameters. With...

The RC832 plus Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two...

The RC832 plus Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two...

The EMAX MT2204 2300KV brushless motor is specially designed for 200-300 sizes multirotors, which weighs only 25g. It offers great performance at affordable price. Each motor is carefully balanced and tested before shipped out from factory. Features:1...

30A Simonk Brushless speed controller ESC for MultiCopter KK Multi-Copter Quad X-flying Description: Highest efficiency 100% N-FET design. Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap...

Features:Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC.Based on BLHeli firmware,optimized for high performance with great linearity and much quicker throttle response.Special designed for...

Emax BLHeli Series 20A ESC Speed Controller 2A 5V BEC for RC Multicopter  Features: - Rotation direction of the motor is programmable: normal, reverse or bidirectional - All parameters can be programmed via using a program card or a...

Brand Ready to Sky Model 2212 Motor KV (RPM/V) 920 Maximum Thrust Around 500gm LiPO Batteries 3S-4S Shaft Diameter (mm) 6 Rated Voltage(V) 7-12 ESC 30A Length (mm) 28 Width (mm) 28 Height...

1.Size: 9*7 CM 2.Layer: Double 3.Layout: standard layout 4.Pitch: 2.54 MM spacing 5.Make plate technology: spray tin green oil 6.Thickness: 1.6   Package Includes 1pc x 7*9cm Universal Board double Sided PCB   

Brands:Ready to sky Model: RS2205-2300 Framework: 12N14P No. of Cells: 3 - 4S Color: Red Length: 31.7mm Shaft: M5 KV: 2300 Max Thrust: 1024g Diameter: 27.9mm Propeller Suggested: HQ 5045 BN Weight: 30g   Features: 1. Race Spec...

100% brand new and high qualityEasy for electronic enthusiasts to assemble.Acrylic material, looks transparent (need to tear down the film).This set of DIY cover is greatly designed for GM328 Transistor Tester, which can efficiently protect the meter...

Description: Brand Name: Kingkong Item Name: Props Guard Color: Black,red,green Weight: 9g(1pcs) Screw: M3 x 10mm Compatible with 22XX series motor   Package Included: 4 x Props Guard1 x Screw Pack

Features: CATEGORY SPECIFICATIONS Product Name RS232 to TTL Converter Module (MAX3232) Function Serial level conversion between RS232 and TTL logic Chip Type MAX3232 Conversion Type Bidirectional (RS232 ↔ TTL) Supported Logic...