MOSFET Drivers and Trigger Modules

The PC817 4-Channel Optocoupler Isolation Module is designed for electrical isolation between high-voltage and low-voltage circuits. It features four PC817 optocouplers, allowing it to safely transmit signals while preventing voltage spikes...

This is a PC817 2-Channel Optocoupler Isolation Board. Onboard with 2-Channel 817 are independent, so can achieve different voltage control at the same time. Using 2-way 817 optocoupler, to achieve the control signal and the control signal isolation, you...

The AC 220V Optocouple Isolation Sensor module is used in applications where you want a simple way to detect that a piece of mains powered equipment is active. It can be used to detect if a load that has been turned on has actually activated. That allows...

It is designed for converting the PWM digital signals into 0 to 10V analog signals.The output voltage is regulated by adjusting the duty ratio of the PWM.Select the PWM signal input level range through short-circuit.It can be used as signal interface...

In the process of circuit signal transmission, the voltage signal will increase with the transmission distance becomes weak, the use of current transmission can avoid the signal weakening. This module is used for the end of the current signal...

The Current to Voltage Converter Module is a versatile device designed for converting current signals into voltage signals. It supports a current input range of 0-20mA, converting it into a corresponding voltage output range of 0-5V. This module is ideal...

Features: CATEGORY SPECIFICATIONS Product Name High-Power MOSFET Switch Module Module Type MOSFET-Based DC Power Control Module Working Voltage DC 4V – 60V Trigger Modes High-level, Low-level, Switch control, PWM control High-Level...

This is a  0-5V to 4-20MA Voltage-to-Current Module. The module is used to convert Voltage into Current.so, In the process of circuit signal transmission, the voltage signal will increase with the transmission distance becoming weak, the use of...

Features: CATEGORY SPECIFICATIONS Product Name 4-Channel MOSFET Switch Module Module Type Electronic DC Switching Module Channel Count 4 Channels (S1, S2, S3, S4) Working Principle MOSFET-based electronic switching Control Type Electronic...

Features: CATEGORY SPECIFICATIONS Product Name YYNMOS-1 MOSFET Driver Module Module Type PWM MOSFET Control Module Model YYNMOS-1 Isolation Type Input and output completely isolated Working Voltage (Output Side) DC 3.7V –...

Features: CATEGORY SPECIFICATIONS Product Name IRF520 MOSFET Driver Module Module Type PWM MOSFET Power Control Module Working Voltage 3.3V / 5V (logic control) Control Platform Arduino, MCU, ARM, Raspberry Pi Output Load Voltage 0 –...

Features: CATEGORY SPECIFICATIONS Product Name 4-Channel MOSFET Switch Module Module Type Multi-Channel MOSFET Electronic Switch Working Principle Solid-state switching using MOSFETs (no mechanical contacts) Number of Channels 4 Independent...

Features: CATEGORY SPECIFICATIONS Product Name MOSFET Electronic Switch Module (Optocoupler Isolated) Module Type PWM MOSFET Power Control Module Working Principle MOSFET-based solid-state switching with optocoupler isolation Input Control...

Features: CATEGORY SPECIFICATIONS Product Name Dual MOSFET High Power Driver Module Module Type PWM MOSFET Power Control Module Working Voltage DC 5V – 36V Trigger Voltage DC 3.3V – 20V (High/Low Level Compatible) Control...