Frequently bought together:
Description
UNO R3 is a microcontroller board based on the ATmega328P .It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.
Features:
| CATEGORY | SPECIFICATION |
|---|---|
| Item Type | Development Board |
| Board Type | Uno |
| Chip Type | ATmega328P |
| Microcontroller | ATmega328 (SMD) – Interface CH340G |
| Operating Voltage (VDC) | 5 |
| Input Voltage (V) | 7–12 V |
| Input Voltage (limit) | 6–20 V |
| Digital I/O Pins | 14 (6 PWM) |
| Analog I/O Pins | 6 |
| PWM Pins | 6 |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Clock Speed | 16 MHz |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Flash Memory | 32 KB |
| Power Supply Option | DC Jack or USB |
| Onboard LEDs | On/Off, L (PIN 13), TX, RX |
| Operating Temperature (°C) | -40 to 90 |
| Dimensions (L x W x H mm) | 75 × 54 × 1 |
Package Includes:
1pc x Arduino UNO R3 ATMEGA328P CH340G
Related Products
Related Products
SOLD OUT
Atmega328P-PU with Arduino Optiboot (Uno)
ATMEL
$3.85
Description
The ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU...
UNO+WiFi R3 ATmega328P+ESP8266
Arduino
$11.55
It is a customized version of the classic ARDUINO UNO R3 board. Full integration of microcontroller Atmel ATmega328 and IC Wi-Fi ESP8266 with 32 MB flash memory, and USB-TTL converter CH340G on one...
Arduino Uno R3 board
Arduino
$11.55
The Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator,...
ACEBOTT UNO R3 Compatible with Arduino
ACEBOTT
$11.94
The ACEBOTT QA001 UNO R3 development board is a micro controller board based on ATMEGA328P. It features 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16...
Arduino DUE R3 Board
Arduino
$34.65
The Due is a microcontroller board based on the SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first board based on a 32-bit ARM core microcontroller. It has 54 digital input / output pins (of...