LilyPad

The LilyPad Simple just got a whole lot... simpler. We've updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that...

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other...

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Coin Cell Battery Holder Module Battery Type CR2032 (20mm coin cell) Function Power supply module for wearable electronics Switch...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Inductive Buzzer (Wearable E-Textile Component) Technology Inductive buzzer Operating Note Acts as short to ground if not actively...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Ambient Light Sensor (E-Textile Module) Sensor Type TEMT6000 analog ambient light sensor Function Measures ambient light intensity...

Features: CATEGORY SPECIFICATIONS Product Type LiPo Power Supply Module (LilyPad Compatible) Function Step-up power supply for wearable electronics Input Source Single-cell 3.7V LiPo...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Pixel Board (RGB LED Module) LED Type WS2812B (NeoPixel with integrated WS2811 driver) Function Addressable RGB LED for wearable...

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.LilyPad is a wearable e-textile technology developed by Leah Buechley and...

Features: CATEGORY SPECIFICATIONS Product Type LilyPad Tri-Color LED Module LED Type RGB LED (Tri-Color) Configuration Common Anode Control Method Ground individual R/G/B pins to...

The CJMCU card is a circular miniature card of about 25mm in diameter. It does not have any connection pin, intended for the applications of electronic clothing, we will simply connect the different...

The WS2812B 4-Pin RGB LED Control Module is a compact and versatile driver board designed to control WS2812B addressable RGB LEDs. With its built-in controller, this module enables...