UV/GY-6070 UV sensor module

(No reviews yet) Write a Review
0.05 KGS
Calculated at Checkout


VEML6070 is an advanced ultraviolet (UV) light sensor with I2C protocol interface and designed by the CMOS process.
It is easily operated via a simple I2C command. The active acknowledge (ACK) feature with threshold windows setting allows the UV sensor to send out a UVI alert message.
Under a strong solar UVI condition, the smart ACK signal can be easily implemented by the software programming.
VEML6070 incorporates a photodiode, amplifiers, and analog / digital circuits into a single chip. VEML6070’s adoption of FiltronTM UV technology provides the best
spectral sensitivity to cover UV spectrum sensing.
It has an excellent temperature compensation and a robust refresh rate setting that does not use an external RC low pass filter.
VEML6070 has linear sensitivity to solar UV light and is easily adjusted by an external resistor.
Software shutdown mode is provided, which reduces power consumption to be
less than 1 μA. VEML6070’s operating voltage ranges from 2.7 V to 5.5 V.
Package type: surface mount
Dimensions (L x W x H in mm): 2.35 x 1.8 x 1.0
Integrated modules: ultraviolet sensor (UV), and
signal conditioning IC
Converts solar UV light intensity to digital data
Excellent UV sensitivity and linearity via FiltronTM
Excellent performance of UV radiation
measurement under long time solar UV exposure
Excellent temperature compensation
High dynamic detection resolution
Standard I2C protocol interface
Support acknowledge feature (ACK)
Immunity on fluorescent light flicker software shutdown
mode control
Package: OPLGA
Temperature compensation: -40 °C to +85 °C
Floor life: 168 h, MSL 3, according to J-STD-020
Output type: I2C bus
Operation voltage: 2.7 V to 5.5 V
Package Included:
1X VEML6070 UV Sensitivity Detection Light Sensor
View AllClose