Motors, Drivers & Actuator

Specification: Item: DS8120 Large Torque 20 KG Digital Servo Voltage: 4.8 ~ 6.8V DC Dead brand: 3μs Weight: 60g (2.12 oz) Motor type: DC motor Gear type: copper and aluminum Working frequency: 50-333Hz Travel profit margin: 180...

Description: This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry...

You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM...

It is a low cost digital servo with export quality and great  servo for just about any application. You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without...

This is 12V DC motor, almost double the power of the 6V DC motor. It is a powerfull motor  fitted with a 34:1 metal gearbox. The gears are all steel and the output shaft is 4mm diameter.  The motor has extra rear shaft (on the high speed...

Driver: L298N Dual H Bridge DC Motor Driver IC Driven the terminal supply area Vs: +5V ~ + 35V; Such as need to take power inside the board, supply area Vs: + 7V ~ + 35V Driven part of the maximum current Io: 2A The logical part of the voltage of...

Features:This new 1803BK DC Motor speed controller allows you to control the direction of a DC motor using a pulse width (PWM) DC voltage controller with duty cycle, the product adjusts completely from 0% to 100%.With a 2A self-recovery fuse and a power...

Specification: Weight: 65g Gear Type:Metal gear Dimension:40×20×40.5mm Stall Torque:18.5kg/cm (4.8v) Stall Torque:21.8kg/cm (6.6v) Operating Speed:0.18sec / 60 degrees (4.8V no load) Operating Speed:0...

Features: - Metal Gear - Full Ball Bearing - Light Weight - Less Noise - Connector Wire Length 250mm   Products Description: For: Mini Car / Mini Ship / Helicopter & Airplane Model: MG90S  SG90 upgraded version Weight:...

L293D motor shield, the input voltage DC4.5-25V-600mA output current capability per channel-1.2A Peak output current (non repetitive) Per Channel-Enable Facility-Over-temperature protection-Logical "0" Input voltage upto 1.5 V(HIGH NOISE...

High-power ULN2003 Stepper Motor Driver Board Test Module For AVR SMD   Description: Rated Voltage: DC5V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625/64 DC Resistance: 200±7% (25) Insulation Resistance: >10M...

TB6600 DC12-45V Single for Axis Two Phase Hybrid Stepper Motor Driver Controller Product description This is a high-quality, high-power, cost-effective Motor DriverHigh current 4.5A, high voltage 45V, output short circuit for protection, superior...

Description: - Good choice for teaching physical DC wind power generation principle.   Specification: Generator Parameters: Diameter: 24.5mm Height: 34.2mm Output Shaft Diameter: 2.0mmOutput Shaft length: 13.5mm Wind Blade Diameter:...

 DC 6V 200RPM Mini Metal Gear Motor With Gearwheel Model:N20 3mm Shaft Diameter    Description:Voltage: 6VRevolving Speed: 200RPMMotor Size: 12mm(diameter)*24mm(height)Shaft Size: 3mm(diameter)*10mm(length)Package Includes:1 x Mini Metal...

Ardumoto L298P AVR/LPC/STM32 UNO/MEGA Motor Driver  Description:- The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.- This is a motor shield for...

DESCRIPTION : Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. Color: Silver Item size: 31*27*19mm Net weight: 35g 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It...

Description: ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and other characteristics, adapted to the requirements of...

Driver board features: * Highly integrated and highly reliable * Interface signals using high-speed optocoupler isolation * Up to 4.5A high current output * The maximum input voltage DC42V * Overvoltage. Undervoltage. Overcurrent alarm protection *...

Description This easy-to-mount GA25-370 DC Gear motor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs. The motor comes in a Small cylinder shape with a diameter of 25 mm and a 4mm diameter...

Specification: Rated voltage: 12VNo-load current: At 12V,1.7A (start current 2.2A)Stall current: 4.7ANo load power: 20.4WProduct speed: about 15600 r / minMotor diameter: 45mmStep height: 5mmStep diameter: 17.4mmMotor length: 67mm (without...