1" DN25 Brass Motorized Ball Valve - 12V
- Calculated at Checkout
CWX-15 DN15 2-way DC12v motorized brass ball valve CR05 5 wires with feedback signal mini electric valve 1 inch
1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times, multi-angel assembling, convenience for all kinds of requirements.
2).Float ball design, no leak, most suitable for heavy dirt and long time no action.
3).The conditions that solenoid valve can not be worked.
4). Under the pressure between 1Mpa and 2Mpa, the working current is only 45mA to 100mA (it depend on the different type)
5). High protection class, can be worked in moist conditions.
Material of main parts:
Actuator: heat-resistant ABS
Sealing: PTFE, silicon rubber ball seat, EPDM and NBR stem seat, NBR o-rings
Body: brass or stainless steel
Ball: brass or stainless steel
Stem: brass or stainless steel
Suitable for :
1.Air-warm valve. HVAC and fire works.
2.IC card meters, heat energy meters
3.Irrigation equipment, drinking water equipment, solar water heaters, washing machines, water heaters, industrial humidifier.
5.Multiple voltage and control mode, applicable to a variety of occasions.
6.Replacing solenoid valve, particularly when solenoid cannot work reliably
7.Solar thermal, under-floor, rain water, irrigation, plumbing service, hot water heating and solar glycol loop, ideal for off-grid system.
Domestic/potable water, Irrigation system, cooling/heating system, Low voltage plumbing system
8.Small equipment for automatic control
9.Water equipment, auto-control water system, industrial mini-auto equipment, Small equipment for automatic control
1pc x 1" DN15 Brass Motorized Ball Valve - 12V