Frequently bought together:
Description
Descriptions:
1. This is a updated version TB6600 4A two-phase stepper motor driver. Positive and negative control can be achieved.
2. Select the 7-step subdivision control (1, 2/A, 2/B, 4, 8, 16, 32) through the 3-digit DIP switch.
4. Suitable for driving 57, 42 two-phase, four-phase hybrid stepping motors.
5. Achieve low vibration, low noise, high speed effect drive motor
Features:
- H-bridge bipolar constant phase flow driven;
- Eight output current optional, the maximum output current: 4.0A;
- 6 subdivision modes available,up to 32 segmentse;
- The input signal high-speed optical isolation;
- Offline hold function;
- Semi-enclosed chassis can adapt to more hard environment;
- Provide energy-efficient semiautomatic current lock function;
- Built-in temperature protection and overcurrent protection.
Specifications:
- Input voltage DC9-40V
- Input current Recommended switching power supply 5A
- Output current 0.5-4.0A
- Maximum power 160W
- Subdivision 1,2/A, 2/B, 4, 8, 16, 32
- Temperature Operating temperature -10~45°C; storage temperature -40~70°C
- Humidity, no condensation, no water drops
- Gases are prohibited from flammable gases and conductive dust
Package Included:
1 x TB6600 upgraded stepper motor driver
Package Included:
1 x TB6600 upgraded stepper motor driver
1 Review
-
TB6600 9-42VDC STEPPER MOTOR DRIVER
the driver works okay but the chip inside is not tb6600 which has a bigger form factor . the chip inside has a small form factor and that affects heat dissipation , otherwise i havent had any issue with it so far. thanks
Related Products
Related Products
ULN2003 Stepper Motor Driver
Dikavs
KES150.00
Description:
Rated Voltage: DC5V4-phaseReduction Ratio: 1/64Step Torque Angle: 5.625/64DC Resistance: 200±7% (25)Insulation Resistance: >10M (500V)Dielectric Strength: 6
A4988 Stepper Motor Driver(with Heatsink)
Electro
KES200.00
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors,...
SOLD OUT
5V Stepper Motor + Driver ULN2003
Deek-Robot
KES400.00
Product Detail:
Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for.supporting the use of a direct plug and easy to use stepper motor used...
SOLD OUT
A3967 EasyDriver Stepper Motor Driver
Deek-Robot
KES500.00
Overview:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver)...
ULN2003 Stepper Motor Driver Board
diymore
KES150.00
Description:
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and...
TB6560 3A Stepper Motor Driver
Deek-Robot
KES1,200.00
Specification:Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)Rated maximum output: ± 3A, peak 3.5AWorking voltage: DC 10V-35VRecommended to use a switching power supply: DC24V power supply