DC 12V 100mm stroke 1500N 7mm/S linear actuator

This miniature linear actuator is using for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications.
It can be replaced by hydraulic, pneumatic products ideal for saving energy consumption.
 

Drive voltage: 12VDC  
Maximum Thrust: 150KG/1500N
Minimum installation size (fully retracted around in the middle of the distance between the two holes): L1= Stroke+105 mm
Maximum installation size (fully extended around the middle of the distance of the two holes): L = 2xS(stroke)+105mm
Ambient temperature :-26  to +65 degree
Protection class: IP 54
Built-in limit switches(When completed stroke, linear actuator automatically stops!)
Low noise design, noise levels below 42 db
Work rule: 10%. Loading rated thrust need 10% work rule. In 20 minutes, 2minutes work 18minutes rest.            

If lower load can extend work time.
Maximum self-locking force 2300N

Speed: 7mm/s
Stroke Length: 100mm / 4 inch
Working frequency: 20%
Built-in limit switches, not adjustable after leave factory.