ULINK2 simulator STM32 simulator ARM

Get ULINK2 here:
1. first install the MDK software in the CD, the first use of ulink2 driver will automatically install ulink2 driver here: C:\\Keil\\ARM\\ULINK (Keil default installation directory);
2. Ulink2 connects to the computer instantly :COM,RUN led will flash at the same time;
C. \\Keil\\ARM\ Hlp\\ ulnk2.chm (Keil default installation directory);
4. Windows 7 client's file should be "run with administrator privileges"/the operating system should minimize permissions and restart the computer before MDK registration service can be run

SWD and SWV wiring instructions:

SW connection mode: SWCLK, SWD, GND, a total of 3 wires, one of which is indispensable; SWV mode needs to add SWO;
Contents missmatch at: 0800005DH (Flash=FFH Required=18H)!
Please attach the reset foot to this error!

We guarantee that:

1) fully compatible with the latest version of MDK software;
2) support automatic firmware updates;
3) after long-term verification and use, the performance is stable without any abnormal;
4) absolute quality assurance, optimal cost performance,
5) the speed of JTAG and SW interface clock TCK can reach 10MHz (speed and 12MHz second only to JLINK V8);

Notes:

1. support MDK3.8 a, 4.0 x, 4.1 x, 4.20, 4.21, 4.22, 4.23, 4.50, 4.53, 4.54, 4.60 upgrade! And later versions of keil software! Use mdk3.8a and above!
2. if the simulation ARM cortex-m4 best use the latest MDK4.23 (keil for ARM) software version above

KEIL ARM emulator is an updated version of ULink emulator, which is used by RealView MDK. KEIL ARM emulator not only has all the functions of ULINK emulator, but also adds serial debugging (SWD) support, back clock support and real-time agent. By using RealView MDK debugger and kEIL ARM simulator, development engineers can easily debug on the target hardware on chip (using on-chip JTAG, SWD and OCDS), Flash programming...

New features of kEIL ARM emulator:

Standard Windows USB driver supports ULINK2 plug and play
Support serial debugging based on ARM cortex-m3
Support memory reading and writing, terminal simulation and serial debugging output during program running
Support 10-pin connector (also support 20-pin connector)

KEIL ARM emulator main functions:
USB communication interface to download user code at high speed
Storage area/register view
Fast one-step program running
Multiple program breakpoint
On - chip Flash programming

Software download:

Here are the latest IAR and keil, or MDK software
Download the latest, no better, only better
http://www.mcuzone.com/down/