IoT and Wireless

1.Product Name: 2.4GHz glue stick Antenna 2.Antenna Gain: 2/3/4DBi 3.Connector Type: SMA Male 4.Frequency: 2400-2500MHz 5.Impedance: 50Ω 6.VSWR: ≤1.5 7.Power: 50W 8.Polarization: vertical 9.Directionality: omnidirectional 10.Shell...

1.Product Name: 2.4GHz glue stick Antenna 2.Antenna Gain: 2/3/4DBi 3.Connector Type: SMA Male 4.Frequency: 2400-2500MHz 5.Impedance: 50Ω 6.VSWR: ≤1.5 7.Power: 50W 8.Polarization: vertical 9.Directionality: omnidirectional 10.Shell...

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver,...

Main description: RT3070 150Mbps Mini USB 2.0 WiFi Wireless network card Wi-Fi WLAN 802.11 b/g/n Adapter with LED indicator light. Fully supports the features and functional compliance with IEEE 802.11 b/g/n standard, supporting up to 150Mbps data rates...

Main description: MIMO technology makes wireless transmission rates up to 150Mbps.CCA technology enhances your signal stablility by automatically avoiding channel conflicts. Quick secure setup, complies with WPS for worry free wireless security...

Introduction and features: 1. Easy and fast customization of extremely low cost enclosures; 2. UUID, Major, Minor and other parameters can be changed according to customer needs; 3. Beacon barcode for easy identification; 4. Based on TI's...

Features:When you do some ESP32(revision 1)projects you must hate to add a power bank to provide the power. This tiny board could solve such problems. A 3000mAH 18650 battery (Not Include)could make ESP32(revision 1) run 17 hours or more. 18650...

Overview The ESP-12S is a WiFi module based on ESP8266, with built-in 32Mbit Flash, in the small SMD16 package. There're also onboard PCB antenna and metal shield. In short, it's a small form factor and fairly high cost effective WiFi module. With the...

Description ESP-WROOM-32 is a powerful universal WiFi-BT-BLE MCU module for a variety of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding...

Description GPS module Minimum size: 23 * 17mm. Dual GPS Antenna Interface: SMA / IPEX. With rechargeable electronics: accelerates startup. With EEPROM: change the baud rate and other data can be saved without power. GPS serial...

Product upgrade part: 1. The pin GPIO34 is replaced with GPIO15 2.  Replace the charging IC (TP5400) with the power management AXP192 3. Replace TX and RX pins of GPS 4. The power switch is removed and replaced with a key switch 5. Minimize...

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver,...

This ceramic antenna cable with a UFL interface is used for GPS, especially for marine navigation. Super durability and pressure resistance. High quality and great connectivity. Features:  This ceramic antenna cable with a UFL interface is used...

nRF51822 Introduction: nRF51822 is a multi-protocol single-chip solution for ultra-low power wireless applications (ULP wirelesss applications). It integrates Nordic's first-class wireless transmitter, and supports Bluetooth(R) low energy and a...

This is a CRIUS MultiWii C I2C-GPS NAV Navigation Board. The navigation board is used for GPS navigation. In this module, all GPS data is available via the I2C bus to connect to 328P Multiwii FC. An LED is connected to the board to show GPS 3D Fix...

The Dragino LoRa shield is a long-range transceiver in an Arduino Shield form factor and based on open source library The LoRa shield allows the user to send the data and reach extremely long intervals of low-Rates of Is it ultra-long range of extended...

Description The LoRa Radio Node v1.0 868MHz based on the ATmega328P and RFM95 868Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, usage is the same as the Arduino pro...

The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building...

The ESP32-S is an Original ESP32 series module from Ai-Thinker. This wireless module based on ESP32, supports WiFi and Bluetooth 4.2, with built-in 32Mbit Flash, in the SMD38 package. There’re also onboard PCB antenna and metal shield. In short,...

Specification Center Frequency: 433MHz Polarization: Vertical PolarizationGain: 3.0dBiV.S.W.R: <=1.5impendance: 50 ohm     Connector Material: CopperOperation Temperature: -40~+85 CelsiusLength:100mmWeight: 8.3g Relative...