Water TDS,pH,Flow & Level Sensor

  Features:   1. PA66 body, PA66 nylon gear.2. Intubation design of inlet and outlet pipe, easy connection and operation;3. Imported Hall IC from US Honeywell, stable and reliable;4. Flow Range: 2-55L/min;5. working voltage:  5-24V(24V...

Gravity: Analog TDS Sensor/Meter for Arduino is an Arduino-compatible TDS Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. TDS meter can be applied to domestic water, hydroponic and other fields of water quality...

Features: 1）FULL RANGE:one sets. Each set includes one package of 4.01, one of 6.86 and one of 9.18 calibration solution for all pH needs2）FAST and EASY. No need to measure, just mix individual packs with distilled water.3）ACCURACY. Calibration...

Features: The hall effect water flow sensor is light, nimble outline, small size and easy to install. All materials are in line with SGS testing standards. There is an integrated hall effect sensor that outputs an electrical pulse with every...

TDS probe: Number of probes: 2 Overall length: 83cm Connection interface: XH2.54-2P color: White Other: Waterproof probe   Note: TDS probes cannot be used in water above 55 °C. The TDS probe should not be placed too close to the edge of...

Parameter: Input voltage: (InVCC) DC 5 ~ 24 V Current consumption: 5mA Output voltage(High level): InVCC Output voltage (Low level): 0V Output current: 1 ~ 50mA Response time: 500mS Working temperature: 0 ~ 100 degree Induction thickness...

APPLICATION: Water dispenser, Bathtub, Humidifier, Water tank, Electrical appliances requiring liquid level detection,etc.   LIQUID LEVEL CONDITION: Exceeding the critical level Signal output voltage (V): < 0.1 True value: 0 Total current...

Feature:The water flow sensor is applied for water heater, imprinter, automatic water machine, and other flow metering equipment Up and down structure stress applied for the seal ring, avoid to leakwith imported Hall element, and adopt pouring...

This is an Arduino-compatible TDS sensor / meter kit for measuring water TDS value, to reflect water cleanliness. It can be applied to water for domestic, hydroponic and other water quality testing fields. You can also check the Sensor...

Specifications Heating voltage: 5±0.2V (AC -• DC) Working current: 5-10mA The detection concentration range: PH0-14 The detection range of temperature: 0-80 centigrade The response time: ≤ 5S Stability time: ≤...

Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to...

1.The single cylinder pH electrode allows you to connect BNC socket directly into the input terminal of pH meter or pH controller or any pH device that has a BNC input terminal. The cable is long. This gives you the flexibility to measure a solution in a...

Product Features: 1, Lightweight appearance, small size, easy to install 2, The impeller embedded with stainless steel beads, always wearable 3, Hall element, the circuit is equipped with waterproof and sealed rubber ring, waterproof...

Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to...

Features: Turbidity sensor uses optics principles to synthetically estimate turbidity through the liquid light transmittance rate and scattering rate. Since the amount of haze value is gradual, it is usually detected in a dynamic environment. The...

Description Heating voltage: 5 ± 0.2V (AC · DC) Working current: 5-10mA Detectable concentration range: PH0-14 Detection Temperature range: 0-80 ° Response time: ≤5S Settling Time: ≤60S Component Power: ≤0.5W Working...