Load/Pressure/Force/Flex Sensor

DescriptionME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm...

The BME280 is a small package low power digital and digital composite sensor that measures ambient temperature and humidity and atmospheric pressure. It is backward compatible with BMP280, and the air pressure temperature register control and data...

Features Two selectable differential input channelsOn-chip active low noise PGA with selectable gain of 3264 and 128On-chip power supply regulator for load-cell and ADC analog power supplyOn-chip oscillator requiring no external component with optional...

The wind speed sensor is composed of a shell, three wind cups and a circuit module, which is made of aluminum alloy material.The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the...

The GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module with SPI and I2C bus interface. This barometric pressure sensor is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a...

Features:  - This DIP air pressure sensor is suitable for biomedical, meteorology and other fields. The core part is pressure sensor chip which is make by the MEMS pressure technology.  - With wide applicable temperature range.  - Easy...

Features: Anti - bending, high - quality solid structure, high reliability. This level sensor adopts of anti-corrosion material, excellent anti-corrosion performance and durable. Anti - blocking design, easy to clean. 4-20mA transmission output,...

Category: Sensors, transducer pressure Series: MPX5010 Pressure type: Differential Working pressure: 1.45 PSI Port size: Male, 0.194 "(4.9276mm) tube Output: 0 ~ 4.7V Power supply voltage: 4.75 V ~ 5.25 V Termination...

Description: 1.Suitable for wall hanging furnace, gas furnace, gas storage, etc all kinds of hydraulic, pneumatic pressure measurement 2.Suitable for civil use product batch 3.Static accuracy: plus or minus 1.0% FS 4.Pressure range 0-1.2 MPa (can be...

Features Two selectable differential input channels On-chip active low noise PGA with selectable gain of 3264 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with...

Features Two selectable differential input channels On-chip active low noise PGA with selectable gain of 3264 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with...

Aluminum Alloy Electronic Scale YZC-133 Weighing Load Cell Sensor 10kg Product featuresProduct Name : Weighing Load CellRated Load: 10KgThis weighing sensor load cell is widely used in electronic counting scales,platform scales etc.Suitable for...

This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor.  It can connect 2.5mm soft tube and detect the water level and other air pressure. Adopting 5K OHM resistor bridge sensor, it has compact size and easy to...

Product description Note: The color of the item may vary slightly due to photography and your own computerWiring: Red line voltage positive, Black line voltage negativeWhite Line signal positive, Green line signal negative Rated Load: 5KgRated...

Description: MS5540C is a SMD hybrid device including high precision pressure resistant pressure sensor and ADC interface IC. It is a miniature version of MS5534C Barometer / altimeter module, and provides a 16 bit voltage depends on the temperature and...

This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. Theinput circuit...

The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor...

Descriptions: A simple flex sensor 4.5 inch in length made by SPARKFUN. As the sensor is flexed, the resistance across the sensor increases. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside...

2.2" Bending sensor. The degree of bending of the sensor can be converted into a change in resistance value. The larger the bending, the higher the resistance. This sensor can be used to make energy gloves.Note: Bending direction: The side with...

The Interlink Electronics 1.5” Square FSR uses a 1.5" square pad to sense applied force. Force Sensing Resistors (FSRs) are very thin, robust, polymer thick film (PTF) devices that decrease in resistance when increased pressure is applied...