Load, Pressure, Flow & Vibration

This Pressure Transducer is Part of All New Product  Line Up from Robu. in. The Pressure Transducer is made from High-Quality stainless steel material providing it with rigidity. The transducer comes with a standard thread size of G1/4 and can work...

Features:This gas meter is connected to hose to measure unidirectional gas flow.Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.It is simple to use, and has 8mm barbs for convenient connection to hoses.Can measure blast...

1.Description:It is a flow meter for measuring water flow.2.Feature:1>.High precision2>.High pressure resistance3>.Standard size3.Parameter:1>.Model: YF-G12>.Specification: G13>.Work Voltage:DC 4.5V~24V4>.Work current:20mA5>.Flow...

DescriptionME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm...

The BME280 is a small package low power digital and digital composite sensor that measures ambient temperature and humidity and atmospheric pressure. It is backward compatible with BMP280, and the air pressure temperature register control and data...

Description 100% brand new and high quality. 3-Axis, Digital Magnetometer with I2C interface          The MAG3110 Board is a development tool for measuring magnetic fields. It features a high sensitive digital magnetometer...

Features Two selectable differential input channelsOn-chip active low noise PGA with selectable gain of 3264 and 128On-chip power supply regulator for load-cell and ADC analog power supplyOn-chip oscillator requiring no external component with optional...

Specifications: Model: GY-25 Chip: MPU-6050 Power voltage: 3 - 5V Communication mode: Serial communication ( baud 9600,115200 ), IIC communication Model Size: 15.5mm*11.5mm Pitch: 2.54mm Direct Data: YAW ROLL PITCH Heading angle (YAW ): ...

  Features:   1. PA66 body, PA66 nylon gear.2. Intubation design of inlet and outlet pipe, easy connection and operation;3. Imported Hall IC from US Honeywell, stable and reliable;4. Flow Range: 2-55L/min;5. working voltage:  5-24V(24V...

Gravity: Analog TDS Sensor/Meter for Arduino is an Arduino-compatible TDS Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. TDS meter can be applied to domestic water, hydroponic and other fields of water quality...

Features: 1）FULL RANGE:one sets. Each set includes one package of 4.01, one of 6.86 and one of 9.18 calibration solution for all pH needs2）FAST and EASY. No need to measure, just mix individual packs with distilled water.3）ACCURACY. Calibration...

Description: Category: Sensors, TransducersFamily: Position Sensors – Angle, Linear Position MeasuringSeries: SV01For Measuring: Rotary PositionTechnology: ResistiveRotation Angle – Electrical, Mechanical: 0° ~ 333.3°,...

Feature: Name: MPU-9250 module (three-axis gyroscope + three-axis acceleration + three-axis magnetic field) Module Model: GY-9250 Use chip: MPU-9250 Power supply: 3-5V (internal low voltage regulator) Communication method: Standard IIC communication...

The wind speed sensor is composed of a shell, three wind cups and a circuit module, which is made of aluminum alloy material.The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the...

Features: The hall effect water flow sensor is light, nimble outline, small size and easy to install. All materials are in line with SGS testing standards. There is an integrated hall effect sensor that outputs an electrical pulse with every...

The GY-51 LSM303DLH chip has an accelerometer, magnetometer, A / D converters and signal conditioning circuit integrated. Still, the communication to the processor is done through the I2C bus. Thus only one chip is required to achieve a six-axis data...

TDS probe: Number of probes: 2 Overall length: 83cm Connection interface: XH2.54-2P color: White Other: Waterproof probe   Note: TDS probes cannot be used in water above 55 °C. The TDS probe should not be placed too close to the edge of...

Parameter: Input voltage: (InVCC) DC 5 ~ 24 V Current consumption: 5mA Output voltage(High level): InVCC Output voltage (Low level): 0V Output current: 1 ~ 50mA Response time: 500mS Working temperature: 0 ~ 100 degree Induction thickness...

APPLICATION: Water dispenser, Bathtub, Humidifier, Water tank, Electrical appliances requiring liquid level detection,etc.   LIQUID LEVEL CONDITION: Exceeding the critical level Signal output voltage (V): < 0.1 True value: 0 Total current...

Product description： This is a small vibration motor suitable for use as a non-audible indicator. When the input is high, the motor will vibrate, just like your silent mobile phone.   Features: - Rated voltage: 5.0VDC - Working Voltage: 3.0 - 5...