Light/Color/Optical Sensor

Features:Photosensitive resistance is the resistance of a semiconductor material, the conductivity change with light intensity varies.The use of this feature will work if made of different shapes and light-receiving area of the photosensitive resistance...

The PT334-6C 5MM Phototransistor is a high speed and high sensitive NPN silicon phototransistor. It is completely ;ead and halogen free. It is packaged as a 5mm LED using a clear epoxy, making it sensitive to infrared radiation...

Specifications  Net Weight:16gWorking Voltage: 12VLoad Power: AC 250V/10A, DC 30V/10A  Module instructions 1. photoresistors module is most sensitive to ambient light, generally used to detect the brightness of the ambient light.2. when the...

Specifications:Voltage: 5-5.5V DCCurrent: less than 1.5APrinciple: Use a covering on the photosensitive nozzle, when the light is shining on the obstruction to form a shadow, the light on one side. When the difference is formed with the other...

Overview: 1. The GY-33 is a low cost color recognition sensor module. Working voltage 3-5v, low power consumption, small size, easy to install. 2. The working principle is that the illumination LED emits light, and after illuminating the object to be...

Features: 1. Red, Green, Blue (RGB), and White Light Sensing with IR Blocking Filter 2. Programmable Analog Gain and Integration Time 3. 3,800,000:1 Dynamic Range 4. Very High Sensitivity ? Ideally Suited for Operation Behind Dark Glass 5. Maskable...

The resistance of 20mm GL20528 Light Sensitive Photoresistor LDR changes with the change in the ambient light exposed on the surface of the sensor. As the light on the sensor increases then the resistance across the two leads decreases. Light Dependent...

Photo transistors are operated in their active regime, although the base connection is left open circuit or disconnected because it is not required. The base of the photo transistor would only be used to bias the transistor so that additional collector...

The MAX44009 ambient light sensor has an I2C digital output that is suitable for a number of portable applications such as smartphones, notebooks and industrial sensors. Less than 1μA current, is the lowest power sensor in the industry and has...

Parameter: Input voltage: DC 12V Output voltage: DC 12V Load current: 3A Standby current: 10mA Output form: single output Sensing range: 3cm Induction principle: distance Load power: 36W-72W Delay off time: none Scope of application: DC,...

The LilyPad Light Sensor is an e-textile friendly version of the Ambient Light Sensor Breakout. If you've used the breakout in a project before, the hookup and code will be very similar. You will need to connect to a LilyPad Arduino or...

according to the spectral characteristics of three photoresistor photoresistor: UV light-sensitive resistors, infrared light-sensitive resistors, Visible photoresistor; the main parameters are as follows: dark current, the dark resistance:...

Description:1  ROHM original BH1750FVI chip2. Power supply: 3-5v3. Light intensity range: 0-65535 lx4. Sensor built-in 16bitAD converter5. Direct digital output, omitting complex calculations, omit calibration6. Does not distinguish between ambient...

Introduction:  MH-ET LIVE Scanner v3.0 is a barcode and QR code scanning recognition module. It adopts a professional image processing chip for barcode recognition. It can quickly and accurately read under the high performance of fast and stable...

CJMCU-101 is an integrated photodiode and transimpedance amplifier which out chip inside. For putting integrated photodiode and transimpedance amplifiers in a single chip, it can prevent common problems in discrete designs. Such as...

Feature:   On-board TCS3200 color sensors Take the wide Angle lens , removable, can identify the large or small area of objects. Support 3 V-5 V voltage input Chip pin all has drawn, put the needle for standard 100 mil (2.54 mm), convenient...

Description: The ML8511 breakout is an ultraviolet light sensor which is easy to use. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that's tested. This breakout can be very handy in...

Features:Photosensitive resistance is the resistance of a semiconductor material, the conductivity change with light intensity varies.The use of this feature will work if made of different shapes and light-receiving area of the photosensitive resistance...

Features: TEMT6000 sensor maximum sensitivity of 570 nm, it has a plus or minus 60 ° wide half Angle of sensitivity.Although the device is sensitive to ambient light, but it inhibits infrared (IR) spectra, which can provide a similar higher...