LORA WAN

The Dragino LoRa shield is a long-range transceiver in an Arduino Shield form factor and based on open source library The LoRa shield allows the user to send the data and reach extremely long intervals of low-Rates of Is it ultra-long range of extended...

Description The LoRa Radio Node v1.0 868MHz based on the ATmega328P and RFM95 868Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, usage is the same as the Arduino pro...

The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building...

Description The RN2483 is a fully-certified 868 MHz module based on wireless LoRa® technology.  The RN2483 utilizes a unique spread spectrum modulation within the Sub-GHz band to enable long range, low power, and high network capacity...

DescriptionSerial transceiver module is a low cost, high performance transparent FSK transceiver with operating at 434 MHz. It features small size, high output power, high sensitivity, long transmission distance and high communication data rate with auto...

DescriptionThe real GFSK monolithic transceiver chipBuilt-in hardware and link layerAutomatic response and automatic retransmission functionAddress and CRC check functionChannel switching time is very short, can be used for frequency hoppingFully...

The RFM95W wireless module is built around Semtech’s SX1276 transceiver featuring the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity. We used these in our Mini Ultra Pro...

Module Features ■FSK/GFSK , LoRa(Long Range) spread spectrum technique■ Half-duplex communication■ Excellent blocking immunity■ Channel rejection ration(ADJ):56dBm■ High RX sensitivity : -139dBm■ ISM multiband, free of charge with no need to apply for...

Description Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the...

OverviewCore51822 is a wireless module based on nRF51822 - the Multiprotocol Bluetooth® 4.0 low energy/2.4 GHz RF SoC designed for ULP (ultra low power) wirelesss applications. SpecificationsOnboard chip: nRF51822Communication distance (open...

This is an exciting upgrade from the popular RFM12B.  The RFM69 is the next generation with improved functionality and performance, and it provides about 30% greater range.  The RFM69CW module has been tested and proven to work in several...

This breakout board is designed for NRF24L01+ user, comes with 2×4 socket that enable direct plug and use of NRF24L01 module and break the IO out to 6-way straight header pin with proper label, easier for hookup with jumper wires. Not to forget,...

Features: Tri-band transceiver operating frequency for the international ISM band 433/868/915MHz GMSK modulation, anti-interference ability, especially for industrial control applications using the DSS + PLL frequency synthesizer technology, excellent...

Description The LoRa Radio Node v1.0 433MHz based on the ATmega328P and RFM95 433Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, usage is the same as the Arduino pro...

NRF24L01P + PA + LNA Division for the ultra-long-distance data transmission, specially developed high-power and high sensitivity wireless module 2.4G ISM band NRF24L01P + PA + LNA wireless module to work in the license-free that can be point-to-point...