ESP WiFi Modules

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver,...

Main description: RT3070 150Mbps Mini USB 2.0 WiFi Wireless network card Wi-Fi WLAN 802.11 b/g/n Adapter with LED indicator light. Fully supports the features and functional compliance with IEEE 802.11 b/g/n standard, supporting up to 150Mbps data rates...

Main description: MIMO technology makes wireless transmission rates up to 150Mbps.CCA technology enhances your signal stablility by automatically avoiding channel conflicts. Quick secure setup, complies with WPS for worry free wireless security...

Features:When you do some ESP32(revision 1)projects you must hate to add a power bank to provide the power. This tiny board could solve such problems. A 3000mAH 18650 battery (Not Include)could make ESP32(revision 1) run 17 hours or more. 18650...

Overview The ESP-12S is a WiFi module based on ESP8266, with built-in 32Mbit Flash, in the small SMD16 package. There're also onboard PCB antenna and metal shield. In short, it's a small form factor and fairly high cost effective WiFi module. With the...

Description ESP-WROOM-32 is a powerful universal WiFi-BT-BLE MCU module for a variety of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding...

Product upgrade part: 1. The pin GPIO34 is replaced with GPIO15 2.  Replace the charging IC (TP5400) with the power management AXP192 3. Replace TX and RX pins of GPS 4. The power switch is removed and replaced with a key switch 5. Minimize...

Description: WIFI Kit series is the new development of the cost-effective networking program, the main chip using ESP32, LX6 dual-core processor, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver,...

The ESP32-S is an Original ESP32 series module from Ai-Thinker. This wireless module based on ESP32, supports WiFi and Bluetooth 4.2, with built-in 32Mbit Flash, in the SMD38 package. There’re also onboard PCB antenna and metal shield. In short,...

Description: The WeMos D1 mini is a miniature wireless 802.11 (Wifi) microcontroller development board. It turns the very popular ESP8266 wireless microcontroller into a fully fledged development board. Programming the D1 mini is as simple as...

Feature: Hardware Specifications   Chipset ESPRESSIF-ESP32 240MHz Xtensa® dual-core 32-bit LX6 microprocessor FLASH QSPI flash 4MB / PSRAM  8MB SRAM  520 kB SRAM Button Reset USB to...

This ESP8266 Serial Wireless WIFI Module Adapter Plate is for ESP-07, ESP-08, ESP-12E ESP8266 SMD ESP8266 Module. These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and...

Product features: Main chip: MT7601UN Supported protocols and standards: IEEE 802.11g,IEEE 802.11b,IEEE 802.11n Interface type: USB1.1 USB2.0 Frequency range: 2.4-2.4835GHZ Number of working channels: 14 Data modulation: OFDM/CCK/ 16-qam /...

Description: - The development board integrates the ESP8266 18650 battery. A standard 3000mah 18650 battery can run for 17 hours.- You can call it "WiFi battery". I am going to make it easier to develop ESP8266 ESP8266 project to add 18650 battery.-...

Products Description: ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4...

Description: Type:ESP-12F Standards Certification: FCC / CE / TELEC Wireless standards: 802.11 b / g / n Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM Operating voltage: 3.0...

Description :This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications. It can be the replacement for your NRF24L01, it can talk to your Wifi router directly through the UART MCU's (Rx, Tx).The ESP-12 module...

Specifications  Wireless Standards: IEEE 802.11n (draft) IEEE 802.11g IEEE 802.11b Host Interface: High speed USB2.0/1.1 interface Chipset: REALTEK 8188 RF Frequency: 2412 ~ 2462 MHz (North America) 2412...

 MINI KIT ESP32 module development board wireless WiFi Bluetooth 2-in-1 dual-core CPU ESP32 Live ESP32 Mini Development Board Wifi Bluetooth Iot Development Board is ESP-WROOM-32 dual core CPU based WiFi-BT-BLE MCU module that targets a wide...

Description: A adapter module for ESP-01 Wi-Fi module. 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.Also, the item can be used with UNO R3 or compatible board...