Other Motor Driver

Description0.Power InPut : AC18-80V or DC24-80V1.New 32-bit DSP technology 2.Ultra-low vibration noise3.Is built with high segmentation4.Automatic setting of parameters5.Precision current control of makes the motor much less hot6.Electrical current...

Features: 1. Supply voltage can reach 48V 2. The peak value of the output current can reach 5.6Az 3. Optical isolation, the pulse maximum response frequency is 200KHz 4. Low speed zero vibration with minimal noise 5. Strong anti-interference...

Features: ● 57 series 4.5A or less (including 4.5A) two-phase four-wire, six-wire, eight-wire stepper motor also can be used● The drive uses a discrete component structure that supports two-phase 4-wire, 6-wire, and 8-wire as long as there is...

RoMeo V2 [R3] is an all-in-One Arduino-based robot board, it is especially designed for robotics applications and extended devices. Romeo benefits from the Arduino open-source platform. It is supported by thousands of open source projects and can easily...

 Features: 1. RosBot is a motherboard based on Scratch3.0 design2. Based on UNO motherboard, on board 2 dual H-bridge motor drives3. Can be upgraded with Raspberry Pi 2, Raspberry Pi 3B+, and Intel UP Board single board computer4...

Characteristic: Open-source Interactive Programmable Low price Simple Smart WI-FI enabled  For a similar hardware IO: Advanced API for hardware IO, which can drastically reduce redundant work for hardware configuration and...

You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM...

Description:  The LN298 is a high voltage, high current, dual full-bridge motor driver designed to  accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.Comes in a staggered, 15-lead...

TB6600 DC12-45V Single for Axis Two Phase Hybrid Stepper Motor Driver Controller Product description This is a high-quality, high-power, cost-effective Motor DriverHigh current 4.5A, high voltage 45V, output short circuit for protection, superior...

The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing...

Descriptions: 1. This is a updated version TB6600 4A two-phase stepper motor driver. Positive and negative control can be achieved.  2. Select the 7-step subdivision control (1, 2/A, 2/B, 4, 8, 16, 32) through the 3-digit DIP switch.  4...

Modules window:1. The two parallel MOS active output, lower resistance, electric current is bigger, strong power, room temperature 15A, 400W, met the most equipment used;2. Wide voltage, support PWM;3. The control of high power...

Description HY-DIV268N-5A subdivision-type two-phase hybrid stepping motor drive use DC 12 ~ 48V power supply.It is suitable for driving two-phase hybrid stepping motor, whose dynamic voltage is 12 to 48V,the current is less than 5A and the outer...

Description L298P Shield DC motor drives using LGS\'s outstanding high-power motor driver chip dedicated L298P, can directly drive two DC motors, drive current up to 2A, motor output using eight-speed Schottky diodes as protection. Stack design can be...

Product characteritics:- Own 16M storage,can storage thousands of instructions,255 actions- Servo interface three colour pins- No need for programm,insert to the computer and software control- 32 bit high efficiency low consumption CPU- Cross platform...

Description:Item Name: Servo TesterSize: 46x32x17mmWeight: 8gColor: BlueInput: DC 4.2 to 6.0VOutput: ≤15mA (5.0)Output signal: 1.5ms±0.5msAdjustment Methods: Manual, Neutral, Automatic.Features:Small size,low power consumption,high reliability...

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 for Arduino Raspberry Pi DIY Servo Shield Module Want to make a hexapod walker? Maybe you're making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise...

Specification:Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)Rated maximum output: ± 3A, peak 3.5AWorking voltage: DC 10V-35VRecommended to use a switching power supply: DC24V power supplySubdivision: whole step, half-step, step 1/8,...