Logic Converter

USB A Type Male to JST 4 Pin Female Connector Extension Cable. Cable Length 20Cm, and JST Connector Lead Spacing Pitch 1.27mm. Features/Specs: Connector A: USB A Type Male Connector B: 4Pin JST No of Pin in JST Connector: 4Pin JST Connector Lead...

Product Description: The ADS115 and ADS1015, 4-channel split version are ideal for adding high-resolution analog-to-digital conversion to any microprocessor-based project. These boards can run on power and logic signals between 2V and 5V, so they are...

Description  The CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. CP2102 Based boards are better, reliable and faster than Cheap...

Feature:Chip: FT232RLDraw out all signal port of FT232RL chipRXD / TXD transceiver communication indicatorUSB power supply, can choose 5V or 3.3V, set by jumperWith over current protection, using 500mA self-restore fusePin definition: DTR, RXD, TX, VCC,...

The ADS1232 and ADS1234 are precision 24-bit analog-to-digital converters (ADCs). With an onboard, low-noise programmable gain amplifier (PGA), precision delta-sigma ADC and internal oscillator, the ADS1232/4 provide a complete front-end solution for...

Description: CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices...

Description:- Test hook clips are ideal for Logic Analyzer.- This is a very easy to use tool . It's a 10 pin tool . It can help you connect the chip, pins, etc. easily.- For USB 24M 8CH- Cable length: 28cm / 11"- Total length: 35cm / 13.8" Package...

USB 2.0 to TTL RS485 Serial Converter Adapter FTDI FT232RL ,double function double protect USB 485 modules FT232 chips Standard: USB2...

Product Description: *For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input...

This RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion. These boards usually have...

Features: Brand new and high qualityCapable of grabbing very small pointsColor: red, black, yellow, blue, green, white Package List: 1pc x Logic analyser clip

Description: This is USB 24M 8CH 24MHz 8Channel logic analyzer latest support 1.1.30 For Saleae Sampling rate up to: 24 MHz The logic for each channel sampling rate of 24M / s. General applications around 10M, enough to cope with a variety of...

Built-in TTL COM PC-PL2303HX Chip Standard USB type A male and TTL 4 pin connector Simple and Easy way to give USB support to your designs Available for Linux, , WinCE and Windows (XP, 2003), Vista Win 7 Black cable-----GND Green cable-----TXD White...

  FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB. The cables are available with a 6-way SIL, 0.1" connector...

Features:  It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.   This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches...

Product Features: Comes with 3.3V voltage, with power indicator Power input with anti-reverse protection, and can not provide more than 150mA of current. To achieve direct serial 5V and 3.3V level communication. The maximum stable communication baud...

Description With the development of computer technology, parallel port and serial port on the PC slowly disappeared, and now even the desktop are rare parallel port. But for engineers, parallel port and serial port are essential interfaces, especially...

RS485 to TTL MAX485 Module RS485 to TTL MAX485 Module converts TTL signal to RS485 for long range, high data rate error prone differential communication. Digital communications networks implementing the EIA-485 standard can be used effectively...

Description: This transmitter module realizes the mutual conversion between TTL signal and RS485 signal, but we must know that 485 is a half-duplex communication, which can achieve two-way communication, but not in both directions at the same time, it...

Product Description CP2102 its high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB...