Logic Converter

USB A Type Male to JST 4 Pin Female Connector Extension Cable. Cable Length 20Cm, and JST Connector Lead Spacing Pitch 1.27mm. Features/Specs: Connector A: USB A Type Male Connector B: 4Pin JST No of Pin in JST Connector: 4Pin JST Connector Lead...

Description  The CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. CP2102 Based boards are better, reliable and faster than Cheap...

Feature:Chip: FT232RLDraw out all signal port of FT232RL chipRXD / TXD transceiver communication indicatorUSB power supply, can choose 5V or 3.3V, set by jumperWith over current protection, using 500mA self-restore fusePin definition: DTR, RXD, TX, VCC,...

Description: CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices...

Description:- Test hook clips are ideal for Logic Analyzer.- This is a very easy to use tool . It's a 10 pin tool . It can help you connect the chip, pins, etc. easily.- For USB 24M 8CH- Cable length: 28cm / 11"- Total length: 35cm / 13.8" Package...

This RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion. These boards usually have...

Built-in TTL COM PC-PL2303HX Chip Standard USB type A male and TTL 4 pin connector Simple and Easy way to give USB support to your designs Available for Linux, , WinCE and Windows (XP, 2003), Vista Win 7 Black cable-----GND Green cable-----TXD White...

Features:  It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.   This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches...

Description: This transmitter module realizes the mutual conversion between TTL signal and RS485 signal, but we must know that 485 is a half-duplex communication, which can achieve two-way communication, but not in both directions at the same time, it...

Product Description CP2102 its high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB...

1.PCB size: 26.5mm * 15.6mm 2.PCB Color: Black 3. Weight: 4g 4. Using the new chip CP2102 5. with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download 6. With three LEDs:...