Communication Module

USB to RS-485/422 industrial intelligent converter; no power supply needed, plug-and-play. USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with...

Features: 1.This pro duct is embedded within the bluetooth communication protocol,no need to install the driver, can be used on windows systems , you can also use doss, linux and other non- graphical operating system . 2.Support the bluetooth serial...

Description The MCP2551 is a fault-tolerant, high-speed CAN device that can be used as CAN protocol controller and the physical bus interface. MCP2551 provides differential receive capability to the CAN Protocol controller, which is fully in line with...

This module is based on the TLC5615 digital to analog converter chip which uses a 3 wire serial interface for the 10 bit data input. It can be easily interfaced with almost any microcontroller which supports the SPI protocol...

- RS422 interface, two-way communication. A B Y Z ultra-long transmission 1000 meters. The module has 15KV ESD protection. - Add 10 ohm current limiting/overcurrent protection resistor to the board. - The module comes with TVS diodes. Anti-lightning,...

You've always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it The CJMCU-MCP4725 is an I2C controlled Digital-to-Analog converter (DAC) A DAC allows you to!. send analog signal, such as a sine wave,...

Features:This is a brand new MCP2515 CAN bus module TJA1050 receiver SPI protocolCompatible with Arduino based micro-controller projects.Specifications:Support CAN V2.0B specification, the communication speed 1Mb / S0 to 8-byte data fieldThree frames -...

Description: 1. A module chip using PCF8951 2. module supports external voltage input capture (input voltage range 0-5v) 3. Three modules integrated photoresistor acquisition environment through the AD intensity accurate numerical 4. modules...

Description The ADS1115 are precision analog-to-digital converters (ADCs) with 16 bits of resolution offered in an ultra-small, an MSOP-10 package. Data are transferred via an I2C-compatible serial interface, four I2C slave addresses can be...

Description:CJMCU-7400 SN74HC00D Quad 2-input positive and non-door The 74HC00 device contains four independent 2-input NAND gates.74HC00 logic function expression: Y = / (A · B) or Y =A+BPositive logic features Wide operating voltage...

Features: - This is a pcb board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. - This chip is like a rotary switch - it internally routes the common pin to one of 16 channel pins (CHANxx). - It works with both...

This is 10 Pin to 6 Pin Adapter Board  AVR ISP USBASP STK500. The standard 10PIN  programmer can be used to interface to standard 6PIN Interface Converter. AVR MCU development board can be used to download Interface...

Features:USB to RS485 Converter AdapterUSB connector: to your PCRS485 connector: to your RS485 deviceNo need external power, powered by USB portFully compliant USB 2.0 standard , backward compatible with USB1.1NOTICE: Per the notice from factory, the new...

Description The PCF8574 IO Expansion Board is used as remote 8-bit I/O expander for I2C-bus. Up to 8 PCF8574 IO Expansion Board can be connected to the I2C-bus, providing up to 64 I/O ports. The PCF8574 IO Expansion Board features I2C pinheader on one...

Description This is a DB9 female/male adapter plate signal module, RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block. Connector DB9 adapter terminals to facilitate commissioning equipment of project. The wire range of the 9...