Amplifier IC

Description The LM386N-1/NOPB is a Wide Vin Class-D low Power Audio Amplifier with internal gain designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external...

Product Overview The TL071CP is a low-noise JFET-input general-purpose Operational Amplifier incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low-input bias...

Description PAM8403 is a 3 Watt, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass...

Description The TL082ACP is a JFET-input Operational Amplifier designed to offer a wider selection than any previously developed operational amplifier family. The JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar...

Description The MCP6022-I/SN is a 10MHz dual rail-to-rail input/output Operational Amplifier with high performance. A low typical operating current of 1mA and an offset voltage that is less than 0.5mV. The MCP6022 features advanced CMOS technology...

Description The TL081CP is a JFET input operational amplifier (op amp) in 8 pin DIP package. This device incorporates high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias, low...

Description The JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited...

Type a description for this product here...

 

General Purpose Op Amps, LM Series A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single,...

The TDA2822M is a monolithic integrated circuit in 8 lead Mini dip package. It is intended for use as dual audio power amplifier in portable cassette players and radios. Low crossover distortion Low quiescent current Bridge or stereo...

Unique Characteristics In the linear mode the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage. The unity gain cross frequency...

The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. The amplifiers offer...

LM324 Low Power Opamp ICManufacturer Part No: LM324NPackage / Case: PDIP-14RoHS: YesDatasheet:  Click Here  SpecificationsIC - Op AmpNo. of Amplifiers:1Slew Rate:0.4V/µsNo. of Pins:14Operating Temperature Range:-40°C to...