Stepper Motor & Accessories

Specification: 1. Drive mode: constant current chopper drive:2. Excitation mode: 1-2 phase excitation (two-phase eight-beat operation). It can rotate forward and backward;3. Steering: energize in the order of A -B -C -D -A, see C.W from the shaft...

SpecificationsStep accuracy: ±5%Ambient temperature range: 20°C ~ 50°CInsulation resistance: 100MΩ Min.50V DCDielectric strength: 500V AC for 1 minuteStep angle: 1.8°Voltage rating: 3.1 VCurrent rating: 2.5 AResistance: 1.25...

Specifications:Model no.: 17HS4023Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 ± 10%Ω/Phase Inductance: 3.2 ±  20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B Step Angle:...

A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire uni-polar/bipolar stepper motor has 1.8° per step for smooth motion and a nice holding torque. This motor specified to have a max current of 2...

Description:23HS5628 56mm Nema 23 Stepper Motor 57 Motor 2.8A 126N.cm 4-lead CNC Laser Grind Foam Plasma Cut Engraving MachineCertification: CE, ROSH, ISO, FCCShaft Diamter: 6.35mm or 8mm "D"...

   This is the most popular Nema 17 model. It with 1.8°step angle (200 steps/revolution). Each phase draws current 1.3A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). Normally , it use for Linear actuators and CNC...

42 mm x 42 mm x 48 mm (L x W x H) Step Angle: 1.8 degrees Resistance: 1.65 Ω Current/Phase: 1.68 A Voltage: 2.8 V Holding Torque: 43 Ncm Inductance/Phase: 2.3 mH +/- 20% (1 kHz) Weight: 340 g Attached cable: 80 cm, bare wire Shafts:...

Product Description  1.WIDE APPLIACATION：Stepper Motor can be used in DIY small sliders, projects, measuring equipment, laser printers.Also widely used for small devices such as medical equipment, laser engraving machine, etc.2.2‑PHASE 4‑WIRE： This...

Feature Description: Low noise Speed adjustable Long life characteristics High step angle accuracy The specification of stepper motor: Item Specifications Step Angle Accuracy ±5% Resistance...

Description:NEMA 42 stepper motor with T8 380mm lead screw engraving machine fits for 3D printer CNC tools. Specification:Screw: 8mmLead: 8mmLength: 380mmSize: 42x39mm Technique parameter: Phase 2 Step Angle 1...

Specification: ● Name：  42 Stepper Motor● Size：42*42*40mm● Model：42HD4027-01● Weight：275g/pc● Length：40mm● Port of wires：6 pins female PH2.0● Number of phase：2● Step Angle：1.8°● Holding Torque：400mN.m● Rated voltage：3.3V● Rated current：1.5A●...