Electronics Parts

Specifications:Material:Aluminum AlloyColor: BlackThickness:13mmHole distance: 20mmUsed for Delta 3D Printer use Package Includes 1pc x M4 Delta Pulley Slide Gauge

look: Kapton Temp / Polyimide Tape 20mm 33m / Roll Kapton high temperature polyimide single side tape silicone adhesive in many sizes Suitable for 3D printing applications, electrical insulation up to 280 C and PVC circuit boards Specifications 1...

look: Kapton Temp / Polyimide Tape 50mm 33m / Roll Kapton high temperature polyimide single side tape silicone adhesive in many sizes Suitable for 3D printing applications, electrical insulation up to 280 C and PVC circuit boards Specifications 1...

Product Description  1.WIDE APPLICATION：Stepper Motor can be used in DIY small sliders, projects, measuring equipment, laser printers.Also widely used for small devices such as medical equipment, laser engraving machine, etc.2.2‑PHASE 4‑WIRE： This...

Specification: 1. Drive mode: constant current chopper drive:2. Excitation mode: 1-2 phase excitation (two-phase eight-beat operation). It can rotate forward and backward;3. Steering: energize in the order of A -B -C -D -A, see C.W from the shaft...

Description: 1. Size:18.5*16mm 2. Input voltage:3V-10V 3. Single H-Bridge output current:1.5A(It can drive two DC motor) 4. Overcurrent protection:YES 5. Short circuit protection:YES 6. Undervoltage lockout:YES 7...

Horseshoe fixed aluminum block for Reprap Kossel E3D V6 Specifications: Material: Aluminum Alloy Color: Silver  V6: max hole diameter: 3.3mm;  min hole diameter: 2mm Suit for: Reprap Kossel E3D Package includes: 1 X Horseshoe Fixed...

Product manual: 3d printer hot bed high-power expansion module, the appearance of small atmosphere, compact design, heat more powerful, to solve the hot bed power is too large, the current load problem, the module under normal heat dissipation, measured...

SpecificationsStep accuracy: ±5%Ambient temperature range: 20°C ~ 50°CInsulation resistance: 100MΩ Min.50V DCDielectric strength: 500V AC for 1 minuteStep angle: 1.8°Voltage rating: 3.1 VCurrent rating: 2.5 AResistance: 1.25...

Specifications: Working voltage: 5 V Pins: Digital output VCC GND LED that indicate the status Dimensions: 30 x 20 x 8 mm Package Included:1x Limit Switch1 x 3 pin Cable

Description:The intelligent controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" includedThis panel connect your RAMPS 1.4, you do not need...

Overall Length: 36.5 mm Spring portion: 25 mm Ring diameter: 5 mm Material: Carbon steel, black handle, will not rust  

Product features the structure contains introduction tripod switch, fuse holder, Jack Range:ultimaker makerbot 3d printer parts Product description Range: ultimaker makerbot 3d printer parts  Packing List 1 Fuse Power Supply Socket

Horseshoe fixed aluminum block for Reprap Kossel E3D V5 Specifications: Material: Aluminum Alloy Color: Silver  V5: max hole diameter: 3.3mm;  min hole diameter: 2mm Suit for: Reprap Kossel E3D Package includes: 1 X Horseshoe Fixed...

Specifications:Material:Aluminum AlloyColor: BlackThickness:13mmHole distance: 20mmUsed for Delta 3D Printer use Package Includes 1pc x M3 Delta Pulley Slide Gauge

Specifications:Model no.: 17HS4023Size:42*42*23mm Phase: 2 Phase Voltage: 12V Current: 0.7 A/Phase Resistance: 4.0 ± 10%Ω/Phase Inductance: 3.2 ±  20% mH/Phase Holding Togque: 14 N.cm Insulation Class: B Step Angle:...

Feature:Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.25A...

A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire uni-polar/bipolar stepper motor has 1.8° per step for smooth motion and a nice holding torque. This motor specified to have a max current of 2...

look: Kapton Temp / Polyimide Tape 30mm 33m / Roll Kapton high temperature polyimide single side tape silicone adhesive in many sizes Suitable for 3D printing applications, electrical insulation up to 280 C and PVC circuit boards Specifications 1...